569578
26
Zoom out
Zoom in
Previous page
1/45
Next page
26
USING MULTIPLE CONTROLLERS IN THE SAME AREA:
When multiple controllers are installed in the same area of transmission, it
is necessary to manually synchronize each controller with it’s camera(s) in
a different group.
To do this:
1. On the controller, select the SIGNAL mode and press OK.
2. Hold down the button for 3 seconds to reach the group option located
in the upper right corner of the screen controller and press OK.
3. Use or buttons to assign a new group to each additional controller
(maximum 5 BLACKBOX
TM
-D) and press OK.
4. Synchronize the cameras to the new group (follow the steps in the
PREPARING THE CAMERA (P.26) and PREPARING THE BLACKBOX
TM
-D
CONTROLLER (p.26) sections.
Setup • Controller (BLACKBOX
TM
-D
)
• Watching on TV:
Allows the user to view or delete the photos directly on a TV.
1. Turn on the controller.
2. Connect the yellow end of the RCA cable supplied into the VIDEO IN of
the TV and the other end into the TV OUT of the controller. The options
are the same as viewing on the screen of the camera (previously
mentioned)
SYNCHRONIZE A NEW CAMERA TO THE CONTROLLER:
Preparing the camera:
1. Set the name of the camera:
When SETTINGS is selected, choose "Camera ID" and press OK.
Determine the name of the camera by pressing the or buttons to
change the letter and press OK to go to the next space.
2. Continue changing other parameters of the camera as needed.
3. To enable communication with the controller:
While still in the SETTINGS menu, select "Wireless" option and press
OK.
Select "On" and conrm the selection by pressing OK; then on to
return to the previous menu.
4. Select the SIGNAL mode and press OK. The camera searches for the
controller.
Preparing the BLACKBOX
TM
-D controller:
1. Select the SIGNAL mode .
2. Press on "Add new camera" (to see this option, select a blue camera icon
using f or g buttons. The "Sync" icon changes from
red to green in the camera screen when synchronization is
successful.
Note: A camera cannot be synchronized to multiple controllers.
RCA
Notes:
• It’s possible to synchronize up to 10 cameras to a single controller.
• If the name of the camera is changed, it is necessary to resynchronize
the devices by following the steps in the PREPARING THE CAMERA
(P.26) and PREPARING THE CONTROLLER (p.26) sections.
• The "Reset All" option allows to nd the original settings.
• It is possible to easily retrace the BLACKBOX
TM
-D controller with a buzzer
signal by pressing the FN button on the RC-1 remote control. The remote
control must be previously synchronized with the camera, which commu-
nicates with the controller. The remote control (sold separately, p.34)
is part of the product line compatible with the REMOS
TM
technology.
Sync
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spypoint Tiny-W3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spypoint Tiny-W3 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spypoint Tiny-W3

Spypoint Tiny-W3 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info