569578
25
Zoom out
Zoom in
Previous page
1/45
Next page
25
VIEW
Allows the user to view or delete the recorded photos on the controller
screen or on a television.
• Viewing with the screen of the controller:
When VIEW mode is selected, choose the name of the desired camera and
press OK. The last recorded photo automatically appears on the screen.
Press f or g to view the next or previous. Press OK to view the different
options available.
Date and time: To view the date and time printed on the photo.
Protect: Allows the user to protect the photo to prevent it from
being deleted by selecting "Delete All".
Delete: Allows the user to erase from the memory card, the
photo seen on the screen.
Delete all: Allows the user to erase from the memory card, all
stored photos, with the exception of protected photos.
Format: Allows the user to format memory card and delete all
protected photos.
Exit: Allows the user to exit the menu to return to the viewing
screen.
Press the to enlarge the photo on the screen or to return to the original
size. When the photo is enlarged, press OK to allow movement in the photo.
Then use the navigation buttons to explore different parts of the photo. To
disable the mouvement mode, press OK again.
Setup • Controller (BLACKBOX
TM
-D
)
REMOTE
Allows the user to see the camera status, to start/stop the camera, to
verify the quality of the wireless signal and to have an overview of the eld
of view of the camera in real time. If more than one camera is synchronized
to the controller, choose one from those available.
Get camera status
Indicates the battery level and the percentage of used space in the memory
card of the camera.
Start/stop caméra
Allows the user to remotely stop or restart photos taking. These options can
be used if the user is working in the zone of detection of the camera and he
doesn’t want photos to be taken. When nished, he can remotely restart the
camera to continue taking photos.
Range test
Allows the user to check the quality of the wireless signal between the cam-
era and the controller. If the icon of the wireless signal is red, the
signal is too weak. Bring closer or move the controller. If the icon
of the wireless signal is green and stays green for more than 10
seconds, the signal is strong enough and stable to enable wire-
less transmission of photos to the controller.
Live view
Allows a live preview of the eld of view of the camera in real time (1 photo
per second is sent to the controller). Press the BACK button to return to the
previous menu.
This mode requires more battery power.
Note: The message "Waiting for camera" appears on the screen of the
BLACKBOX
TM
-D if the controller is not synchronized with the camera or if
the wrong camera ID is selected.
Note: The preview can also be on a TV using the TV-OUT port of the
controller (see View section, p.25).
Note: The number of yellow stars that appear to the right of the screen
corresponds to the resolution of the photos stored in the BLACKBOX
TM
-D.
=Low résolution =Medium résolution =High résolution
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spypoint Tiny-W3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spypoint Tiny-W3 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spypoint Tiny-W3

Spypoint Tiny-W3 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info