612738

SPT USA IM-100 Ice Maker Manual

7
Zoom out
Zoom in
Previous page
1/9
Next page
6
1. Clean your ice maker first.
2. Open the cover, remove the ice basket and pour water into tank.
Keep water level below the level mark.
3. Plug in the unit and the power indicator light will blink.
4. Press “Power” on the control panel to begin the ice making cycle. The power indicator light will lit.
5. Select the size of the ice cube by pressing the “Select” button. If ambient temperature is below 60°F,
it is recommended to select small or medium size to avoid ice sticking together.
6. The ice making cycle lasts 6 to 12 minutes, depending on the size of the ice cube selection.
7. While the icemaker is on, check water level periodically. If water pump can’t inject water, the ice
maker will stop automatically, and the “Water” indicator will be on.
Press “Power” button, fill water up to the level mark and press “Power” again.
Allow 3 minutes for the refrigerant to settle before restarting.
8. The ice maker automatically stops working when the ice basket is full.
9. Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level.
If unit is not in use, drain all water in the tank reservoir.
USING YOUR ICE MAKER
PROBLEM POSSIBLE CAUSE
SOLUTION
“Water” indicator is on.
Water is low.
Stop the ice maker, fill water, and
restart.
“Ice” indicator is on.
Ice basket is full. Remove ice from ice basket.
“Water” and “Ice” indicator
are both flash.
Ice shovel is stuck.
Check if ice is blocking the ice
shovel, otherwise, consults a
certified technician.
Ice making cycle is too long.
Stop the ice maker, and restart
when the ice blocks melt. Select the
small ice size.
Ice cubes stick together.
Water temperature in inner
tank is too low.
Change the water in the reservoir.
Use water between 45°F-90°F.
Ambient temperature or
water temperature in inner
tank is too high.
Please operate the ice maker below
ambient temperature of 90°F and
use cold water.
Refrigerant liquid leakage. Consult a qualified technician.
Ice making cycle is normal
but no ice is made.
Pipe in the cooling system is
blocked.
Consult a qualified technician.
TROUBLESHOOTING
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SPT USA IM-100 Ice Maker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SPT USA IM-100 Ice Maker in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info