695079
8
Zoom out
Zoom in
Previous page
1/14
Next page
OPERATING THE COMPUTER
Before beginning a workout session ensure that the Safety Key is properly placed onto the Computer Console and
the Safety Clip is securely attached to an article of your clothing.
NOTE: Always stand on the side rails when you start the treadmill, never start the treadmill while you are
standing on the running belt.
QUICK START:
Press the START button on the computer to start exercise, the LCD window will countdown 3 seconds with the LCD
showing "3-2-1" before the running belt starts moving. The running belt starts moving with an initial speed of 1.0
KPH. Always allow the treadmill to reach a speed of 1.0 KPH before stepping on to the running belt. You may
press the SPEED
∧"
or SPEED
∨"
button on the computer console or handlebar to increase or decrease the running
speed during exercise. The split window of SPEED will display your current running speed. The speed range is from
the minimum 1.0 KPH to the maximum 10.0 KPH. You may also press one of the INSTANT SPEED buttons (2 / 4 / 6
/ 8 / 10) on the computer console and the split window of SPEED will display the speed that you have pressed and
the running speed will change to 2 KPH, 4 KPH, 6 KPH, 8 KPH, or 10 KPH respectively. The split window of TIME
will display your elapsed workout time in minutes and seconds. The split window of DIST. (DISTANCE) will display
the accumulative distance travelled during workout. The split window of CAL. (CALORIES) will display the total
accumulated calories burned during workout. The split window of PULSE will display your current heart rate in beats
per minute (BPM). To activate, grip the hand pulse sensors on both handlebars during exercise and the pulse
will display after 4-5 seconds. For a more accurate reading, grip pulse sensors with both hands. During training, you
may press the STOP button on the computer console to stop the treadmill running at any time, or pull out the safety
tether key to stop the treadmill running.
FUNCTION BUTTONS:
START:
Press the START button to start training on different training mode.
STOP:
Press the STOP button to stop training on different training mode.
PROG (PROGRAM):
Press the PROG button to select the pre-set training program (P01-P12) mode before training.
MODE:
Press the MODE button to select different functions (time or distance) for setting exercise goals in manual
program mode before training.
SPEED
∧"
(SPEED UP):
Press the SPEED
∧"
button to make upward adjustments for pre-setting target training time or distance in manual
program mode before training.
Press the SPEED
∧"
button to make upward adjustments for pre-setting target training time in pre-set training
program (P01-P12) mode before training.
Makes speed adjustments during all training periods on different training modes.The speed range is from 1.0 KPH
to 10.0 KPH.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sporttronic ST-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sporttronic ST-500 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sporttronic ST-500

Sporttronic ST-500 User Manual - German - 13 pages

Sporttronic ST-500 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info