388832
10
Zoom out
Zoom in
Previous page
1/52
Next page
8
Instructions for use
Auxiliary handle
Chiselling
Electronic switch
Hammer speed
control
Maintenance
Change of the
dust protection
cap
Disposal
The auxiliary handle (C) is fully adjustable around 360°.
By turning the knob you release the clamping device of the handle.
After adjusting the wanted position clamp handle with great care.
Apply pressure to electronic switch (E)
As soon as you release the switch the machine stops.
The hammer rate (striking impact) varies from low to maximum,
depending on the pressure applied onto the switch (E). This way the
appropriate speed for the job in demand can be selected to assure
exact pointed chiselling without break outs.
The hammer speed control (D) can be used to limit the maximum
hammer speed by steps from 1-6.
As soon as the dust protection cap is worn down (drilling hole is not
sealing the chisel anymore) a change is necessary. Remove dust
protection cap with the support of a screw driver.
The machine has self-disconnecting carbon brushes. When the
brushes are worn the motor will switch off automatically, then a
routine-service is necessary.
Any maintenance or repair work must be carried out in the SPIT
after-sales service or in an after-sales service station formally ap-
proved by SPIT.
For queries, please phone one of the numbers listed on the last
page of this booklet.
SPIT will not be responsible for any tools which have been main-
tained, repaired or modified by agents not formally approved by
SPIT.
We advise you to bring the tool in regular times in service for main-
tenance according to the frequency of usage in order to prevent
accidents, injuries or the damage of the tool.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical
and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compatible
recycling facility.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spit spit 445 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spit spit 445 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info