78638
11
Zoom out
Zoom in
Previous page
1/76
Next page
GB
9
Instructions for use
Area of use
Before using the
equipment
Inserting the tool
Removing the tool
Power indicator
Service indicator
The combi hammer 352 is solely determined for chiselling and ham-
mer drilling of mainly mineral materials (e.g. reinforced concrete,
masonry, tiles, limestone, pavements, ...) without water. Materials
releasing noxious dust or steam during the work may not be treated.
Improper use (e.g. mixing) may cause injury or damage the tool.
The same applies to the chiselling hammer SPIT 452. This hammer,
however, can only be used for chiselling (not drilling).
Consider the main voltage: The voltage of the source of supply is
the same that shown on the information plate on the equipment.
Push the tool through the dust protection cap (K) in the tool fixing.
Then pull back the look lock (J) and turn the tool until it can be inser-
ted into the machine. The tool is locked as soon as it is released.
Check whether it is properly locked by pulling hard on the tool.
Tools that are not securely locked into position may cause injury. It is
important that the tool shank is always cleaned carefully and if neces-
sary lubricated. Furthermore it has to be checked if the dust prote-
ction cap seals completely at the tool shank. Worn dust protection
caps have to be changed.
Withdraw the tool lock (J) and pull out the tool in opposite direction.
Warning! The tool becomes hot during use. For this reason, never
touch with your bare hands (risk of injury)!
The power indicator (F) will light up when plug is inserted. If it is impos-
sible to start the tool even when the green light is on, the tool must be
forwarded to a SPIT after-sales service or to an after-sales service sta-
tion formally approved by SPIT.
When the brushes are worn, the motor will switch off automatically.
This will be indicated about 8 hours in advance by the red service light
(G).
When the brushes are disconnecting, then by the latest, a routine-ser-
vice is necessary (see also the paragraph 'maintenance').
GREEN
RED
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spit 352 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spit 352 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info