Manual Spit 352 (page 9 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

78638

Zoom out

Zoom in

1/76

Please observe the general drawing and explanations on the inner

cover!

■ This machine can be operated safely only when the operating

instructions have been completely read and strictly observed

to. It is recommended to receive practical instruction before

using the machine for the first time.

■ Always inspect cable and plug before using the machine. Have

damage repaired only by a qualified professional.

■ In order to avoid any risks, the connecting cable - if damaged -

has to be replaced by the manufacturer or his agency.

■ Before starting chiselling, ensure that the function selector switch (H)

is in no case in the position ‘hammer drilling’ (only for SPIT 352).

■ Never use the machine without the additional handle (I).

■ The machine is equipped with a safety clutch which allows only a

reduced speed in case of blocking. However this speed can only be

held when holding the machine concentrated on both handles

and a safe stand (e.g. not on a ladder) is assured.

■ The machine must not be used when damp and must not be

operated in wet environment.

■ Use safety glasses, ear protectors, dust protection mask as well as

wear protective gloves and safety shoes.

■ Insert plug in power supply socket only when machine is switched

off.

■ Do not touch the rotating rotating tools.

■ Beware of electric lines, gas and water pipes embedded in walls.

■ Only use genuine accessories.

Non-observance of the safety instructions

and the prescriptions regarding the preven-

tion of accidents will occur the risk of injury!

See enclosure for further safety instructions!

For your safety

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spit 352 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spit 352 Manual

Product: