584073

Spirit Z8 2004 Manual

13
Zoom out
Zoom in
Previous page
1/20
Next page
Z8
12
P1 ~ P5 (PRESET PROGRAM)
Step 1. Press any button to choose P1 ~ P5 in “STOP” mode, each program has a
preset speed and incline value.
Step 2. Press “MODE” button to set the count down time from 10:00 to 99:00. User can
adjust by pressing “FAST/SLOW”. If you do not set the count down, console will
count up from zero. Or press “START” button immediately to start training. Time
is limited to 20 minutes wherein total segments are 20 and each segment
exercising time is 1 minute. Press “MODE” button again to set MAX. speed of
profile from 5.0Mph to 8.0Mph.
Step 3. After setting, press “START” button to start training, treadmill will start a 3
minutes warm up. Or you can press “START” button again to enter exercising
immediately. Treadmill will adjust the SPEED in accordance with profile. You
can press “STOP” button to stop training during operation. Only Speed goes to
zero, other data will save original data. If you don’t clear, press “START” button
to save last time values.
*After running you can exchange speed and incline profile, press “UP/DOWN”
to change to INCLINE profile and press “FAST /SLOW” to change to SPEED
profile.
Step 4. When time counts down to zero, treadmill will be 3 minute cool down. Or press
“STOP” button to stop training immediately and a series of beeps will indicate
end of program.
USER 1 ~ USER 3
Step 1. Choose User 1 ~ User 3.
Step 2. Press “MODE” button to set time. You can adjust by pressing “FAST/SLOW”.
Step 3. Press “MODE” button again to set speed, first segment will flash and press
“FAST/SLOW” button to adjust speed, press “UP/DOWN” button to enter incline
programming then press “UP/DOWN” again to adjust. Press “MODE” button to
enter next segment.
Step 4. After setting, press “START” button to start training, treadmill will adjust the
SPEED and INCLINE in accordance with profile. User can press “STOP” button
to stop training during operation and window will save last values. If last time is
COUNT UP, press “START” to continue COUNT UP and other data will COUNT
DOWN.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit Z8 2004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit Z8 2004 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info