518565
14
Zoom out
Zoom in
Previous page
1/32
Next page
10
Elliptical Trainer
XE395
1. Fasten the two Wheel Covers (79 & 80) above the rollers with four Phillips Head Screws (115). Tighten with
the Phillips Head Screw Driver (157).
2. Plug the power cord into the machine and a grounded wall outlet. Turn the power switch on. Press the start
button and elevate the incline to level 8. Attach the cover (85) to the mid-stabilizer tube with two Phillips Head
Screws (115). Tighten the screws with the Phillips Head Screw Driver (157).
3. Install the Left Handle Bar Covers (81 & 82) and Right Handle Bar Covers (83 & 84) over the Handle Bars
axle connections with four Sheet Metal Screws (119) on each side. Tighten with the Phillips Head Screw Driver
(157).
4. Attach a steel bracket (180) to the Rear Stabilizer Tube on the left and right sides (with the single hole facing
the rear), and secure them with four Phillips Head Screws (122). Tighten using the Phillips Head Screw Driver
(157).
5. Attach the front Rear Stabilizer Cover (87) to the Rear Stabilizer Tube (2) with two Phillips Head Screws (115).
Secure with the Phillips Head Screw Driver (157). Attach the back Rear Stabilizer Cover (88) onto the Rear
Stabilizer Tube with four Phillips Head Screws (115). Secure using the Phillips Head Screw Driver (157).
6. Look closely at the four oor levelers underneath the middle and rear of the elliptical. If any of these aren’t in
contact with the oor, use the wrench (109) to loosen the top nut. Once the nut has been loosened, turn the
rubber caster clockwise until it makes solid contact with the oor. Retighten the top nut to prevent it from
moving.
7. Return the elevation to the at position using the Incline down key.
HARDWARE
STEP 4: Plastic Parts
#119. 3.5 x 12mm
Sheet Metal Screw
(8 pcs)
#115. M5 x15mm
Phillips Head Screw
(12 pcs)
#122. M6 x10mm
Phillips Head Screw
(4 pcs)
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE-395 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE-395 2013 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spirit XE-395 2013

Spirit XE-395 2013 User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info