584041
10
Zoom out
Zoom in
Previous page
1/35
Next page
XU875 & XR895
9
STEP 2: CONSOLE MAST ASSEMBLY
1. Install the Console Mast Cover (31) onto the console mast (2). Make sure the plastic cover is in
the correct orientation.
2. Connect the Upper Computer Cable (44) from the console mast to the lower Computer Cable
(45) and Speed Sensor Cable (46) from the receiving tube in the main body of the bike.
3. Install the Console Mast (2) into the receiving tube (make sure not to pinch the wire cables
(44,45,46). Damage to the electronics could occur) of the Main Frame with the 6pcs of
5/16x15mm Hex Head Screws (68), 4pcs of 5/16 x 19 x 1.5T Flat Washers (76) on the sides
and 2pcs of 5/16x20 x 1.5T Curved Washers (83) on the front by using the 12/14mm Wrench
(112).
4. Install the Upper Computer Cable (44) into the connector in the back of the Console (19). Install
the console onto the mounting plate with the 4pcs of M5x12mm Phillips Head Screws (99) by
using the Phillips Head Screw Driver (114).
5. Install the Handle Bar (3) onto the Console Mast (2) with the 2pcs of 5/16 x 15mm Hex Head
Bolts (68), 2pcs of 5/16 x 20 x 1.5T Flat Washers (83) and 2pcs of
8m/m x1.5T
Split Washers
(82) by using the 12/14mm Wrench (112).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XBR895 2006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XBR895 2006 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info