583978
14
Zoom out
Zoom in
Previous page
1/39
Next page
EL3 /EL5 Elliptical
13
4. Holding the axle (removed in step 2) in one hand, and the foot pad in the other, line up
the large hole in the side of the bracket (under the foot pad) with the hole in the bushing
housing and insert the axle all the way until the washer is flush against the bracket. You
may have to wiggle the axle while moving the footpad slightly to get the axle to go in.
5. Take the bolt that you removed from the axle in step 2 AND INSTALL THE NEW
ANTI-ROTATION BRACKET, then thread it into the hole in the axle. Tighten the bolt
using two wrenches provided. You have to put a wrench on both axle bolts to tighten
firmly.
6. Align the hole in the end of the connecting arm (pivoting rod end) with the hole in the
bracket of the handle bar. The rod end should be on the inside of the handle bar bracket.
Take one of the 1-1/4 X 5/16 bolts and install it through the handle bar bracket and the
rod end. Install a flat washer and Nylon nut on the bolt and tighten firmly using a wrench
on the nut and one on the bolt.
7. Repeat for the right side foot pad/connecting arm.
8. Install the plastic covers over the connection of the rod end and handle bar. The front
inside hole in the plastic uses a self-tapping screw and the two rear holes use the 3/8
machine screws (short). There is a short Phillips screw driver provided for installing the
inside screws.
9. Install the two wheel covers using the four 5/8 machine screws (long).
10. Install the locking pins for the adjustable footpads into the desired holes (XE350, XE550
only).
POWER CONNECTOR LOCATED ON
FRONT, LEFT HAND SIDE OF UNIT.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit EL5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit EL5 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info