584921
3
Zoom out
Zoom in
Previous page
1/4
Next page
3
HOW TO USE YOUR VECTRON
®
WAVE
12
4 5
CHG/OFF/ON
CHG/OFF/ON
1. Turn your Vectron
®
Wave “ON”. After a few seconds
the propeller will begin to spin.
CAUTION: Rotating propellers, please use care
when handling.
2. Set your Vectron
®
Wave on a flat surface or the ground.
NOTE: Your Vectron
®
Wave will go through a “Start-Up
Process” at this point. First it will rise up, then it will
slowly fall, then it will rise up again. This helps it to
memorize the power required to hover on its’ own.
After it rises the second time the process is over and
you can begin to play. NOTE: During this process do not
touch or play with your Vectron
®
Wave as this will make
its’ hovering ability unstable.
3. Hand Play: The Vectron
®
Wave will hover above your
out-stretched hand.
4. Sliding or Tossing: Hold the Vectron
®
Wave by the
catching stick and tip forward 10-30°. Toss or slide gently
to another player.
5. When finished playing press the stop button on the
charger to turn the propeller “OFF” then turn the power
switch on the Vectron
®
Wave to “OFF”.
NOTE: If the Vectron™ Wave tips over or sticks to the ceiling,
use the STOP button on the charger to stop the propeller.
After pressing the stop button on the controller, the Vectron
Wave will slow down and settle to the ground.
TROUBLESHOOTING
Charger LED is OFF
(not flashing).
Stop button is not working.
Charger LED is flashing Red/
Green alternatively while
charging Vectron
®
Wave.
1. Charger may be in sleep mode
(enters sleep mode after about
2 minutes of inactivity).
2. The batteries in the charger are drained.
1. Vectron
®
Wave is out of range.
2. Charger is in sleep mode.
1. Error while charging.
1. Turn charger OFF then ON again.
2. Install new batteries in charger.
1. Move charger closer to the
Vectron
®
Wave.
2. Turn charger OFF then ON again
or press stop button again.
1. Check that the connection between
the charger and the Vectron
®
Wave
is not broken, if it is reconnect.
PROBLEM
SOLUTIONCAUSE
3
Beginning of
“Start-Up
Process”
Finished,
Ready to
Play
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SpinMaster Vectron Wave Air Hogs at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SpinMaster Vectron Wave Air Hogs in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info