680548
13
Zoom out
Zoom in
Previous page
1/28
Next page
GB
13
3.2.2 POSITIVE SUCTION HEAD
For positive suction head filling of a machine, proceed as follows:
• Open the gate on the suction tubing
• Close the gate on the delivery tubing
• Open and remove the priming plug
Pour the liquid into the machine through t he priming plug hole until the liquid starts overflowing
• Close the priming plug
• Start the machine
• Open the gate on the delivery tubing.
3.2 ELECTRICAL CONNECTIONS
WARNING
Verify that the voltage and frequenc y of the electropump
shown on the nameplate correspond to those available on
the mains.
DANGER
Electric shock risk
The installer must make sure that the electric system is
grounded in accordance with the law in force.
DANGER
Electric shock risk
Make sure that the electric syst em has a high-sensitivity
circuit breaker D =30 mA (DIN VDE 0100T739).
Single-phase motors have a permanently inserted condens er and a thermal protection fitted on the
motor winding.
Customers will be responsible for protections of three-phase motors. Elec tric connections should
be performed using cables H07RN-F (for external c onnections) or H05RN-F or H07RN-F (for internal
connections).
CHAPTER 4 – STARTING THE UNIT
WARNING
Use the electropump for the applic ations listed on the
nameplate.
WARNING Do not operate the electropump without uids.
WARNING
Do not operate the electropump when the interception
valve on the delivery side is completely closet.
Before starting the electropump fill the electropump body as indicated at item 3.2 “Priming”, check
that it rotates clockwise when looking at the electropump fr om the side of the motor fan.
On the three phase electropumps it is possible to invert the rotation by changing the order of two
phases. It is advisable to empty the electropump and repeat the above-de scribed operations, if the
electropump is not used for long intervals of time.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Speroni CTX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Speroni CTX in the language / languages: English, French, Italian as an attachment in your email.

The manual is 7,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info