708059

Spektrum DX8 Manual

14
Zoom out
Zoom in
Previous page
1/42
Next page
14


The Model Select function is used to change to a different model memory, typically
when switching from the current model. You can store up to 30 models in the DX8’s
model memory. You can access the model select function through the System
Setup mode or through Direct Model Access. Direct Model Access allows you to
access the model select function at any time the main screen or a telemetry screen
is displayed.

Press the Clear and Back buttons simultaneously to access the Model Select screen
To directly access the Model Select Screen any time from the Main Screen or the
Telemetry screen, press the Clear and Back buttons simultaneously. The Model
Select screen displays for 10 seconds. If no activity occurs, the screen returns to
the previous Main or Telemetry screen.

Press and hold the roller while turning on the transmitter. When System Setup
appears on the screen, release the roller. The DX8 is now in System Setup Mode.
Highlight Model Select then press the roller to access the function.
The following screen appears. Rotate the roller to highlight the desired model
then press to select. The model name will display on the main screen.

The DX8 features ModelMatch technology that prevents operating a model using
the wrong model memory. This feature can prevent stripped servo gears, broken
linkages and even a crash due to attempting to operate a model using the wrong
memory.

Each individual model memory (30 in total) has its own embedded code
transferred to the receiver during the binding process. The receiver actually
learns the specific model memory selected during binding. When bound, it
operates only when that model memory is selected. If a different model memory
is selected, the receiver won’t connect. At any time you can reprogram the receiver
to operate with any other model memory by rebinding with the transmitter
programmed to the desired model.

Model Type programs the selected model memory to function in Helicopter or
Airplane programming. You should program Model Type first when setting up a
new model. Note: You can assign each model memory its own model type.

Press and hold the roller while turning on the transmitter. When System Setup
appears on the screen, release the roller. The DX8 is now in System Setup Mode.
Rotate the roller to highlight Model Type then press to access the function.
The following screen appears:
Rotate the roller to highlight the desired model type (Helicopter or Airplane) then
press the roller to select.
The following screen appears. Rotate the roller to highlight YES then press the
roller to accept the model type. Selecting NO will return you to the previous
screen.
Note: When you change model types (Heli to Acro or Acro to Heli) all
current programming in the selected model memory will reset to the
factory default settings. All previous settings will be lost.
You can return to the System Setting screen at anytime by
pressing the

button on the transmitter once.
To return to the Main screen press the  button on the
transmitter twice or press and hold the Roller for more than
three seconds.
EN
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 Quick start guide - English - 100 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info