726853
9
Zoom out
Zoom in
Previous page
1/42
Next page
9SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
EN
BINDING
Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifi er) code of a single specifi c trans-
mitter. The DX18 and AR9020 are pre-bound at the factory. You will need to rebind after the model programming is initially set up to
fully program the model’s failsafe positions.
2. 3.
4.
6.
7.
1.
5.
Binding Using the Receiver and Receiver Battery
Binding Using the Receiver and ESC
2. 3.
1.
4.
5.
6.
1. Move the throttle stick to the lowest position and power off
the transmitter.
2. Insert the bind plug into the BIND/DATA port on the receiver.
3. Connect a fully charged receiver pack to any open port on
the receiver. The orange LED on the receiver rapidly fl ashes
when the receiver is in bind mode.
4. Press and hold the transmitter bind button while powering
the transmitter on.
5. Release the Bind button when the transmitter screen
displays “Binding”. Binding is complete when the orange
transmitter and receiver LEDs are on solid.
6. Power off the receiver and remove the bind plug.
1. Lower throttle to the lowest position and make sure the
transmitter is powered off.
2. Insert the bind plug into the BIND/DATA port.
3. Insert the ESC plug into the THRO port.
4. Connect battery to ESC and turn on ESC switch, if available.
The receiver’s LED will rapidly fl ash when the receiver is
ready to bind.
5. While pressing the Bind button, power on the transmitter.
6. Release the Bind button after the receiver has stopped fl ash-
ing rapidly, once the receiver’s LED stays illuminated; this
indicates the receiver is bound to the transmitter. The screen
also provides binding information.
7. Remove the bind plug from the receiver.
CAUTION: When using the DX18 with parkfl yer receivers, only use such receivers in parkfl yer-type aircraft. (small electric
airplanes or mini and micro helicopters). Installing park fl yer receivers in larger aircraft could cause signal blocking and loss
of connection.
Mode 2 shown
Mode 2 shown
Hold button while powereing on
Hold button while powereing on
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX18 - SPM18000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX18 - SPM18000 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX18 - SPM18000

Spektrum DX18 - SPM18000 User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info