648621

Spectra SFA3800 First Alert Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
E-9
pressing the DIAL BUTTON.
4. Press
BUTTON to exit the setup mode.
SETTING THE TONE/PULSE DIALING MODE
1. Press MENU BUTTON repeatedly (or press MENU then
buttons) until “TONE/PULSE” is shown.
2. Press the DIAL BUTTON.
3. Select the required dialing mode using the or and confirm with the DIAL BUTTON.
4. Press
BUTTON to exit the setup mode.
SETTING THE RINGER VOLUME CONTROL
The ringer sound level can be adjusted by sliding the RINGER SELECTOR to select Hi, Mid or Lo level.
The RINGER INDICATOR will flash with all incoming calls.
ADJUSTING THE HANDSET VOLUME CONTROL
This feature is useful for people with impaired hearing who require extra level of amplification and tone control
offered by this telephone.
The VOLUME BOOST INDICATOR is used to indicate when the volume level is increased.
1. Press the +40dB VOLUME BOOST BUTTON, the VOLUME BOOST INDICATOR will turn ON.
2. Adjust the handset volume by turning the rotary HANDSET VOLUME CONTROL to select the desired
listening level (level 1 to 9).
3. During the conversation, you may turn OFF the volume boost by pressing the RED +40dB VOLUME BOOST
BUTTON again, and the VOLUME BOOST INDICATOR will turn OFF. The sound level will return to normal.
4. When you hang up, the phone will reset to normal sound level.
SETTING THE TONE CONTROL (TONE HI/LO)
The TONE HI/LO SLIDE CONTROL allows you to fit your specific hearing needs, so words are clearer and easier
to understand. Slide the TONE HI/LO CONTROL to “Lo” to enhance the lower frequency range and to “Hi” to
enhance the high frequency range.
Note: The tone control function will not be effective when the VOLUME BOOST INDICATOR is OFF.
SETTING THE SPEAKER VOLUME CONTROL
You can adjust the speakerphone volume to a more comfortable listening level using the SLIDE VOLUME
CONTROL.
PAIRING THE REMOTE PENDANT
The phone comes with one remote pendant for emergency use. You can pair up to a total of 5 pendants to your
phone. FULL will show on the display if you attempt to pair a sixth pendant. To pair the pendant to your phone:
1. Press MENU BUTTON repeatedly (or press MENU then
buttons) until “REMOTE PENDANT” appears.
2. Press DIAL BUTTON to pair your new pendant to your phone, “PAIRING” will appear.
3. Press DIAL BUTTON again and when “PAIRING…” appears, press the red REMOTE PENDANT TRANSMIT
BUTTON. If the pendant is successfully paired, “PAIRED” appears, if not “PAIRING FAILURE” would appear.
4. If you want to cancel a paired pendant, select “DELETE?” and press DIAL BUTTON to confirm. A voice
prompt will confirm the successful delete action. It will then exit to normal display automatically.
TELEPHONE OPERATION
DIALING A CALL
1. Pick up the HANDSET or press
BUTTON (the SPEAKERPHONE INDICATOR will light) and wait for a
dial tone.
2. Press the KEYPAD for the telephone number you wish to dial. The display will show the number that you
have dialed on the KEYPAD. If you dial a number over 14 digits long, it will show the last 14 digits only.
3. When you have completed your call, hang up the HANDSET or press
button again to release the
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spectra SFA3800 First Alert at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spectra SFA3800 First Alert in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info