Manual Spectra SFA3800 First Alert (page 8 of 20) (English)

648621

Zoom out

Zoom in

1/20

E-7

2. Insert a small flat-head screwdriver into the rectangular slot at the bottom of the PENDANT to twist open the

REMOTE PENDANT TOP COVER.

3. Remove the old battery and load a new 12V

type LR23 alkaline battery into the battery compartment

following the polarity markings as indicated on the PCB. (Remarks: the metal plate with a spring is the

negative battery terminal).

4. Snap the REMOTE PENDANT TOP COVER back into place and tighten the screw on the bottom cover.

BATTERY CARE

 Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.

 Do not mix old and new batteries.

 Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

 If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can

cause damage to the unit and may void the warranty.

 Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery

manufacturer’s directions).

 Do not dispose of batteries in fire, batteries may explode or leak.

MOUNTING THE PHONE ON A WALL

The phone may be mounted on a suitable wall or other vertical surface by following the procedures below.

Select an area of the wall where you would like to hang your phone and make sure that there are no pipes or

electrical cables buried in the wall in this area.

Caution: Cables to electrical switches and sockets usually run vertically in the wall. Do not mount your phone

directly above or below an electric switch or socket unless you are sure that the cables will not be damaged by

the fixing screws.

1. Drill two holes vertically, one above the other, 3-1/4” (83mm) apart, and leave the screws protruding from the

wall by about 3/16” (5mm).

Note: Adjust the amount that the screw heads protrude from the wall so that when the phone is finally hung,

it lies flat.

2. Press and lift out the HANDSET HOLDER. Remove the hanging peg (located by the hook switch) by pushing

it upwards and snap it into place so it will hold the handset in place when the phone is mounted on the wall.

3. Insert the two tabs of the WALL MOUNT BRACKET into the matching slots opposite the keyhole slot on the

underside phone base. Then press down and slide the bracket upward until the tabs snap into place and the

bracket is latched in place by the WALL MOUNT BRACKET LATCH.

4. Plug one end of the TELEPHONE LINE CORD into the TEL. LINE JACK at the back of the base.

5. Plug the other end of the LINE CORD into the wall plate jack, then align the base's KEYHOLE SLOTS with

the screws and slide the telephone unit downward to secure it.

SETUP MENU

There are 11 different functions in the setup menu for this telephone.

You can press the MENU BUTTON repeatedly to access each of them one by one or direct access your desired

function by pressing MENU BUTTON followed by a NUMBER of the KEYPAD as follows:

DIRECT

ACCESS

NUMBER

SETUP FUNCTION FUNCTION DESCRIPTIONS

N/A

LCD Contrast

Adjusts the contrast level of the LCD panel for easy reading

Enter Time/Date

Enter the time and date information

Language

Select the desired display language from 11 options: English

(default),

Spanish, French, Italian, German, Dutch, Turkish,

Slovenski, Portuguese, Swedish , Danish

Voice

Select the desired voice prompt language from 4 options: English

(default), Spanish, Italian, French

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spectra SFA3800 First Alert in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spectra SFA3800 First Alert Manual

Product: