Manual Specialized VADO SL (page 11 of 161) (English, Italian, Portuguese, Spanish)

733463

Zoom out

Zoom in

1/161

6. GENERAL NOTES ABOUT MAINTENANCE

The VADO SL bicycle is a high performance bicycle. All regular maintenance, troubleshooting, repair and parts

replacement must be performed by an Authorized Specialized Retailer. For general information regarding

maintenance of your bicycle, please refer to the Owner’s Manual. In addition, routinely perform a Mechanical Safety

Check before each ride, as described in the Owner’s Manual.

 Great care should be taken to not damage carbon ﬁber or composite material. Any damage may result in a loss

of structural integrity, which may result in a catastrophic failure. This damage may or may not be visible during

inspection. Before each ride, and after any crash, you should carefully inspect your bicycle for any fraying,

gouging, scratches through the paint, chipping, bending, or any other signs of damage. Do not ride if your bicycle

shows any of these signs. After any crash, and before you ride any further, take your bicycle to an Authorized

Specialized Retailer for a complete inspection.

 While riding, listen for any creaks, as a creak can be a sign of a problem with one or more components.

Periodically examine all surfaces in bright sunlight to check for any small hairline cracks or fatigue at stress

points, such as welds, seams, holes, and points of contact with other parts. If you hear any creaks, see signs of

excessive wear, discover any cracks, no matter how small, or any damage to the bicycle, immediately stop riding

the bicycle and have it inspected by your Authorized Specialized Retailer.

 Lifespan and the type and frequency of maintenance depends on many factors, such as use, rider weight,

riding conditions and/or impacts. Additionally, the VADO SL uses a power-assisted drive system, which means

more distance is covered in the same amount of time. Components may be subject to increased wear at

different rates, depending on the component. Drivetrain and brake components are especially subject to wear.

Periodically have your Authorized Specialized Retailer inspect your bicycle and components for wear.

 Exposure to harsh elements, especially salty air (such as riding near the ocean or in the winter), can result in

galvanic corrosion of components such as the crank spindle and bolts, which can accelerate wear and shorten

the lifespan. Dirt can also accelerate wear of surfaces and bearings. The surfaces of the bicycle should be

cleaned before each ride. The bicycle should also be maintained regularly by an Authorized Specialized Retailer,

which means it should be cleaned, inspected for signs of corrosion and/or cracks and lubricated. If you notice

any signs of corrosion or cracking on the frame or any component, the affected item must be replaced.

 Regularly clean and lubricate the drivetrain according to the drivetrain manufacturer’s instructions.

 Do not use a high pressure water spray directly on the bearings. Even water from a garden hose can penetrate

bearing seals and crank interfaces, increasing bearing and crank wear. Use a clean, damp cloth and bicycle

cleaning agents for cleaning.

 Do not expose the bicycle to prolonged direct sunlight or excessive heat, such as inside a car parked in the sun

or near a heat source such as a radiator.

 From time to time, clean the Speed Sensor magnet on the rear wheel with a soft cloth. Depending on your ride

conditions and brake pad choice, dirt and/or metal shavings can collect on the Speed Sensor magnet, which could lead

to interruptions in motor support or wrong speed readings.

WARNING! Failure to follow the instructions in this section may result in damage to the

components on your bicycle and will void your warranty, but, most importantly, may result in

serious personal injury or death. If your bicycle exhibits any signs of damage, do not use it and

immediately bring it to your Authorized Specialized Retailer for inspection.

WARNING! Use a repair stand to support the bicycle during assembly or maintenance, and a

bicycle rack for transportation.

When placing the frame and/or bicycle in a repair stand, clamp the stand to the seatpost and not

the frame. Clamping the frame can cause damage to the frame that may or may not be visible.

WARNING! Always turn off the bicycle when not in use and/or when working on the bicycle.

CAUTION: Do not open the motor assembly. The motor assembly is a sealed maintenance-free

system. Any work on the motor assembly must be performed by a Specialized Service Center.

I have a VADO SL 4.0, I am seeing a flashing message on the computer screen that says
"LO ERT" does anyone know what that means? Submitted on 14-8-2022 at 03:28
Reply Report abuse
I live in AZ and I'm concerned about the summer heat in the garage and how it might effect the battery since the battery is not removable. Storing the bike is not an option, unfortunately. Submitted on 19-4-2022 at 18:59
Reply Report abuse
Chain comes off gear hub when shifting gear to highest. There does not seem to be resistance to this Submitted on 9-3-2022 at 18:04
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Specialized VADO SL in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 54,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Specialized VADO SL

Specialized VADO SL User Manual - German - 195 pages

Specialized VADO SL User Manual - Dutch - 187 pages

Specialized VADO SL User Manual - French, Polish - 195 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Specialized VADO SL Manual

Product: