733469
12
Zoom out
Zoom in
Previous page
1/24
Next page
Page 10 of 20
Rear
derailleur
5
Rear
derailleur
Rear
Brake
Front
derailleur
6
Fig.5: Install each pre-cut housing over each derailleur cable, and into the entry port holes. Be sure to match the housing lengths to the correct
cables. For hydraulic brakes, do not place any housing over the cable, as v this cable will be used to guide the hydraulic housing from the bottom.
Fig.6: Push the derailleur cable housing(s) through the entry port hole(s) until they become visible at the exit port hole.
8
7
8
Run brake housing on inside
of seatstay and chainstay
Fig.7: Place the correct exit port hood scoop over the derailleur housing(s). Keep the cable intended for the rear brake out of the hood scoop.
Fig.8: Hydraulic brakes: With the hydraulic housing disconnected from the brake lever, install the rear brake caliper on the seatstay brake mount,
then run the housing through the exit port hood scoop brake hole. Tape the housing to the brake cable. Fasten the hood scoop to the frame.
9
FOAM:
52cm
10
S149900018
FOAM ICR SLEEVE 11MM OD
Fig.9: Pull the cable attached to the brake housing until the housing comes out the entry port hole.
Fig.10: Install a section of 52cm long foam tubing (talc pre-applied at factoryv) over each section of housing, through the entry port hole.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Specialized FSR - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Specialized FSR - 2015 in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info