733469

Specialized FSR - 2015 Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
Page 9 of 20
NOTE: For optimal performance, Specialized suggests that the rear brake and rear derailleur housings enter the hood scoop on the non-drive-side of the
frame, while the front derailleur and Command Post IR enter the hood scoop on the drive-side of the frame. However, these are only recommendations.
The setup should be done based on the particular needs of the chosen components and rider preferences.
Fig.2: Choose the entry and exit port hood scoops that match the desired component selection (fig.1). Each frame has its own predetermined
selection of hood scoops installed at the factory, with the additional hood scoop options supplied in the parts bag.
ENTRY PORT HOOD SCOOPS
• 5/4mm: Rear brake (5mm), derailleur (4mm)
• 4/4mm: Derailleurs and/or Command Post IR
• 4mm: Derailleur or Command Post IR
• 0mm: Blank
EXIT PORT HOOD SCOOPS
• 4/4/5mm: Derailleurs (4mm) and rear brake (5mm)
• 4/5mm: Rear derailleur (4mm) and rear brake (5mm)
5/4
mm
4/4
mm
4
mm
0
mm
4/4/5
mm
4/5
mm
2
ENTRY PORT HOOD SCOOPS EXIT PORT HOOD SCOOPS
Measure out the cable housing lengths for the chosen components (derailleur, Command Post) by running the housings from the handlebar
controls, along the underside of the down tube and to the receiving component. Cut each length of cable housing with an additional few inches to
accommodate changes during the final installation.
TECH TIP: To keep track of the intended component for each cable, mark each cable with a piece of tape for the correct component.
NOTE: Mechanical cable actuated rear brakes can be installed in the same way as derailleur and Command Post cables. Hydraulic brakes are installed
in the opposite direction. Refer to pages page 10 and page 11 for additional information.
NOTE: If running a Command Post IR, it is recommended to refer to the Command Post IR Adjustable-Height Seatpost Instruction Guide, and complete
the installation of the Command Post IR cable housing before installing any other cable housing.
3
Rear
derailleur
Rear
brake
Front
derailleur
4
Fig.3: To help simplify the installation of the cable housings, designate a derailleur cable housing for each component (derailleur, brake, Command
Post) and mark each cable with tape. Run each derailleur cable through the proper entry port hole with the cable head entering first.
Fig.4: Guide each cable out through the exit port hole. If necessary, use a hooked dental pick.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Specialized FSR - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Specialized FSR - 2015 in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info