Manual Spartherm Ebios Fire - Solitar (page 12 of 24) (English)

810395

Zoom out

Zoom in

1/24

GB 12

2.5 ASSEMBLY / INSTALLATION

Whether free-standing or wall-mounted, the ebios-fire unit must be aligned

horizontally and secured so that it cannot tip. The wall-mounted model

should be attached to the wall and the free-standing model should be fas-

tened to the wall or floor. Note the safety clearances (Fig. 1 radiant area).

Rear vents must not be closed or obstructed. Place the burner, with its

safety pan and cover plate, in the unit’s designated receptacle.

The floor on which free-standing units are placed must have sufficient load-

bearing capacity. If not, appropriate measures should be taken, e.g. using

a board to spread the load, in order to achieve the requisite safe loading

capacity.

Suitable fasteners should be used for wall-mounting (e.g. wall dowels,

screws, etc.).

2.5.1 ASSEMBLY / INSTALLATION – MODELS

QUADRA AND ELIPSE

Close the furniture housing cover. Please ensure correct positioning so that

there is a uniform (depending on the model see Fig. 2 or Fig. 3) air gap

between the housing cover and flame area so as to ensure a sufficient

supply of air. Otherwise the housing cover can become covered in soot and

the flames may no longer be uniform in appearance.

Thread

After installing the wall-mounted

appliance on the wall, the appliance is

to be secured from being accidentally

pushed upwards/dismounted using

the spin-lock.

Housing cover

Burner

Fig. 2

(View may vary from your model)

Air gap approx. 9 mm (without cover plate)

Housing cover Burner

Fig. 3

(View may vary from your model)

Air gap approx. 7 mm (without cover plate)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Ebios Fire - Solitar in the language / languages: English as an attachment in your email.

The manual is 0.83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spartherm Ebios Fire - Solitar Manual

Product: