810395

Spartherm Ebios Fire - Solitar Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
GB
GB 11
2.2 BURNER MAT CERAMAT FN
The included CERAMAT FN (black) burner mat should only be handled with
gloves to prevent possible skin irritation. The material is easily damaged and
should not be folded, bent or similar.
2.3 GENERAL REQUIREMENTS FOR INSTALLATION
All relevant national and European standards and local regulations (storage
and fire precautions, etc.) must be noted and observed when installing and
operating the ebios-fire. The following is a list of the relevant regulations
(without any claim to completeness). They refer only to operation in Ger-
many. In other countries the regulations that apply there must be observed.
BetrSichV Industrial Safety and Health Ordinance
Vbf Technical Rules for Flammable Fluids
BsV The fire protection requirements of the particular federal state
LBO State building regulations
GefStoffV Hazardous Substances Ordinance
The ebios-fire should only be installed in rooms and at locations where the
position, structural conditions and type of use will not create any hazards.
The floor area of the room where it is installed must be of such a type and
size that the ebios-fire can be correctly operated in accordance with the
regulations.
Only approved and sufficiently strong handling aids should be used to
transport your ebios-fire. The following points must be noted to ensure safe
transport without any problems:
• The ebios-fire may only be lifted with transport aids from its rear side (if
required), especially if sack barrows are used.
• There must be no fuel in the fire tray during transport.
Damage in transit - Please contact your supplier without delay. Protect the
cover and visible parts of your fire from dirt and damage during installation
and transport.
2.4 INSTALLATION LOCATION
When choosing the installation location for your ebios-fire please ensure
the unit is not directly exposed to major heat sources such as radiators,
stoves, etc. and that it is not installed in a room where high temperatures
occur (e.g. a sauna).
External heating of the ethanol fireplace while the appliance is not being
used, may lead to the escape of the fuel from the tank. The fuel will escape
from the burner channel into the overflow tray. In this case, please remove
the burner before ignition and empty the overflow tray.
Your ebios-fire must not be installed:
• In stairwells and landings, except in residential buildings with no more
than two flats.
• In corridors accessible to the public
• In garages
• In rooms where highly flammable or explosive substances or mixtures
are processed, stored or manufactured in such quantities that ignition or
explosion would be hazardous.
• In poorly ventilated spaces.
• In unsupervised areas accessible to the public.
• In areas not sufficiently protected from cross-draughts.
• On top of tables, furniture, up against a wall, etc
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Ebios Fire - Solitar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Ebios Fire - Solitar in the language / languages: English as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info