674318
10
Zoom out
Zoom in
Previous page
1/56
Next page
UR8100 / English Instruction Manual
3
ALARM SETTING
SETTING THE ALARMS (ALARM 1 and ALARM 2)
Be sure to observe the PM indicator when setting the alarm to make sure the alarm time is set
correctly for AM or PM. If the PM Indicator is ‘On’, the alarm time will be afternoon/night time. The
setting sequence for AL1 is as follows :
Normal Time ALARM 1 Hour ALARM 1 Minute Normal Time
1. Tap the ALARM 1(or ALARM 2) button (1 or 2) to show the preset alarm time.
2. Press and hold the ALARM 1 (or ALARM 2) button (1 or 2) again for about 2 seconds until
the Hour Indicator on the LED DISPLAY flashes. Press the << (3) or >> (4) button to obtain
the desired Alarm Hour.
3. Tap the ALARM 1 (or ALARM 2) button (1 or 2) again to advance to the Minute Indicator.
Press the << (3) or >> “(4) button to obtain the desired Alarm Minutes.
4. Press the ALARM 1(or ALARM 2) button (1 or 2) to finish setting and exit to normal time
display.
5. To disable ALARM (or ALARM 2) from automatically sounding on the upcoming days, press
and hold the ALARM 1(or ALARM 2) button (1 or 2) for about 2 seconds, the corresponding
ALARM 1 (or ALARM 2) INDICATOR will go off.
6. To resume ALARM 1 (or ALARM 2) from automatically sounding on the upcoming days, press
and hold the ALARM 1 (or ALARM 2) button (1 or 2) for about 2 seconds, the corresponding
ALARM 1 (or ALARM 2) INDICATOR will turn on and the alarm will sound the following day at
the set time.
TURNING OFF THE ALARM
When the preset alarm time is reached, the ALARM 1 (or ALARM 2) INDICATOR will flash on the
LED DISPLAY and the beeper alarm will sound for 30 minutes unless interrupted by pressing
SNOOZE (7). To stop the alarm immediately, tap the corresponding ALARM 1 (or ALARM 2)
button (1 or 2). The alarm will ring again at the same alarm time on the following day, or when set to
go off based on your Alarm settings.
Notes :
When the Beeper alarm begins, it will sound at a lower beeping rate and gradually increase to
the normal rate within 30 seconds.
SNOOZE FUNCTION
When the alarm source is sounding, press the SNOOZE (7) button to suspend the alarm and
activate the snooze function. The Alarm will temporarily stop and sound again 9 minutes later but
the ALARM 1 (or ALARM 2) indicator will keep flashing.
Notes:
This manual snooze operation can be repeated again and again.
To turn off the snooze function before it ends, tap the corresponding ALARM 1 (or
ALARM 2) button (1 or 2). The ALARM 1 (or ALARM 2) INDICATOR will stop flashing.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR8100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR8100 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 8,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info