674318
9
Zoom out
Zoom in
Previous page
1/56
Next page
UR8100 / English Instruction Manual
2
POWER CONNECTION
PREPARATION FOR USE
AC-DC adaptor connection: The clock unit can be powered by an external AC-DC adaptor, required
the output DC 5V 1200mA (included).
POWER CONNECTION
Plug the AC-DC adaptor to a household outlet AC source. This unit is equipped with a battery back
up system; it requires a 3V flat lithium battery “CR2032” (not included). Insert the battery in the
battery compartment, making certain that the positive and negative (+and-) battery terminals are
attached to the corresponding terminals on the plate in the battery compartment. If an AC power
failure occurs, the clock automatically switches to the battery power supply, the clock continue
running. When the AC power resumes, the clock switches back to AC again.
INSTALLING/REPLACING THE BACK-UP BATTERY
1. Unscrew and remove the BATTERY COMPARTMENT COVER.
2. Install one fresh CR2032 lithium battery into the battery compartment following the polarity
diagram on the BATTERY COMPARTMENT COVER. Use only the specified size and type of
battery.
3. Replace the BATTERY COMPARTMENT COVER and tighten its screw.
Note: The unit will operate without a battery installed but your time & alarm setting will be lost and
will have to be reset in the event of power interruption or failure.
IMPORTANT:
Be sure that the battery is installed correctly. Wrong polarity may damage the unit and void the
warranty. For best performance and longer operating time, we recommend the use of good quality
alkaline battery.
TIME MANUAL SETTING
SETTING THE TIME
1. Press and hold the CLK.ADJ.” (5) button for about 2 seconds to enter the time set mode.
2. While the display is flashing, repeatedly tap the <<”(3) or >>” (4) button to adjust to the correct
time. Press and hold the <<(3) or >> (4) button for faster scanning backward or forward. Tap the
CLK.ADJ.”(5) button to confirm.
Notes:
The display sequence in time set mode will be as follows:
12/24 Hour Time Format Real Time Hour Real Time Min Normal Time
During the time set, if no button is being pressed within 10 seconds, the current display time
will be automatically stored.
Make sure the hour is set so that the PM indicator is displayed correctly for afternoon/night
times.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster UR8100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster UR8100 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 8,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info