733867

Soundmaster RCD1350PI Manual

12
Zoom out
Zoom in
Previous page
1/62
Next page
2. During play or pause mode, if Skip down button (11) is pressed, it will go back to the beginning of the track,
same track no. is display and continuous the play or pause mode.
3. After step 2, press skip down button (11) again, it will go to the previous track and continuous the play or pause
mode.
For MP3 disc/file
1. Place the MP3-CD to CD compartment. After focus search is performing, the total number of track will be shown on
the LCD display (16).
2. Press Skip up or Skip down (11) button to select the track number.
3. When the desired track and album is being selected, press the “ Play/Pause
” button (13) to start playback.
Remark
- Press “ Folder up or down “ button (9/10) on main unit can select the MP3 folder directly.
- The number of folder will display on LCD (16) for 1-2 seconds selected and then it will resume to the number of the
track being playback
Repeat/Random mode
Press the “ Rep/Ran “ button (3) during playback to select repeat and random function, a single track, single folder (MP3
only) or all the tracks can be played in difference mode as follow:-
For CD
(1) Repeat 1 (2) Repeat all track (3) Random (4) Off mode
Indicator
Play mode on LCD display
Repeat track REP
Repeat all REP
Random RANDOM
Off mode --------------
For MP3 disc/file
(1) Repeat 1 (2) Repeat 1 folder (3) Repeat all tracks (4) Random (5) Off mode
Indicator
Play mode on LCD display
Repeat single track REP
Repeat single folder REP & flashing
Repeat all tracks REP
Random RAN
Off mode -----------------
Repeat play
You can listen the desired tracks or folder repeatedly by this function.
Random play
You can listen all the tracks in a random order by this function
CD / MP3 disc programming
Up to 20 tacks can be programmed for disc play in any order. Before use, be sure to press the stop button.
1. Set in CD mode.
2. Press the Memory button (2), “ MEMORY “ & “ P01 ” will appear and flashing on LCD display (16).
3. Select a desired track by using the Skip up /Skip down buttons (11).
4. Press the Memory button (2) to enter the track into the memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press “ Play/Pause “ button (13) to play the disc in the
order you have programmed.
7. Press “ Stop
”
button (14) to terminate program play.
Press “ Stop
”
button (13) at CD stop mode to cancel all programmed memory until the “ MEMORY “ indicator
disappear on LCD display (16).
For MP3 disc / file, press the “ Folder up “ button (10) to select the 1
st
track of next folder directly and hence to speed
up the song selection.
The programming mode will automatically stop if no button is being pressed in a period of about 30 seconds after
pressing the Memory button (2).
3
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster RCD1350PI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster RCD1350PI in the language / languages: English, German, Dutch, French, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info