733867

Soundmaster RCD1350PI Manual

11
Zoom out
Zoom in
Previous page
1/62
Next page
Setting the clock
1. Set unit in standby mode.
2. Press and hold the “Folder up/Clk-adj ” button (10)
a second, The minute digit flashing on the LCD display(16). Press
skip up
or
skip down
button (11) to set the correct minute. Press “ Folder up/Clk-adj ” button (10) to store
the correct minute.
3. The hour digit will flashing, press the skip up
or
skip down
button (11) to set the correct minutes. Then
press “ Folder up/Clk-adj ” button (10) to store the correct hour.
The clock setting will automatically stored if no button is being pressed in a period of about 10 seconds
during clock setting mode.
To avoid the re-set of clock frequently when exchange the battery, please insert 2 pcs AAA size
(um-4) battery at the clock/alarm back-up battery compartment (30) in the direction as below
direction:-
Remark : Pull down the ribbon while insert the battery, this can help to release it easier when
changing the battery in the next time.
Listening to radio
Operation
1. Turn on the unit by On/Standby button (6), unit defaulted on Tuner mode and the TUNER LED indicator (24) will light
up.
2. Select the descried band by band switch (27)
3. Turn the tuning knob (12) to set the station frequency as desired.
4. adjust volume know (5) to the desired volume level.
Hints for best reception:-
- FM : the receiver has rod antenna (26) hanging at the rear cabinet. this wire should be totally unraveled and
extended for best reception.
- AM : the receiver has a built-in am bar antenna. If am reception is weak, slightly rotate or re-positioning of the unit will
usually improve the am reception.
FM-stereo reception
The FM-stereo LED indicator (23) will light up to show FM stereo program is receiving.
Playing CD/MP3 disc
Getting start
1. Press Function button (4) to select CD mode.
2. Open the CD compartment by pressing the CD door open/close (20). Put a CD disc into the compartment and close
the CD door.
3. Focus search is performance if disc is inside. Total number of tracks is read.
Play / pause mode
1. Press the “ play/pause
” button (13) to start playback, the first track will start playback.
2. To interrupt, press the “ play/pause
” button (13) once, and the playing time will be freeze on the lcd display
(16). Press again to resume normal playback.
Stop mode
1. If Stop button (14) is pressed during play or pause mode. Go to stop mode and display total number of track on the
LCD display (16).
Skip mode (skip up /skip down )
1. During play or pause mode, if skip up button (11) is pressed it will go to next track and display the track no. and
then continuous the play or pause mode.
2
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster RCD1350PI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster RCD1350PI in the language / languages: English, German, Dutch, French, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info