733824
19
Zoom out
Zoom in
Previous page
1/90
Next page
PL979 / English Instruction Manual
6
PROGRAM FUNCTION IN CD/MP3 MODE
Set the unit in CD stop mode. 1.
Press the “PROGRAM” button on the remote control to enter the program mode, “MEM” 2.
“P01 T 01” will show on the display.
Press the ” button or “ ” button on the remote control to select your desired track 3.
and then press the “PROGRAM” button to confirm.
Repeat the step 3 to program further tracks. 4.
Note: You can save a maximum of 20 MP3 tracks or 20 CD tracks. ‘FULL’ will show on
the display when the maximum tracks has been reached.
Press the PLAY/PAUSE button to play the saved tracks, press or to select 5.
a track in the sequence saved.
Press the “STOP ” button twice to leave the program mode. The entire program stored 6.
in memory is canceled.
PHONO
INSTALLATION OF THE COUNTER WEIGHT
1. Place the counterweight on the tone arm and push or turn as far as it will go (Figure 1).
2. Turn the counterweight back to the white mark (Figure 2).
3. Turn ONLY the black ring until the "0" mark points upwards. Hold the silver part of the weight
(picture 3).
4. Turn the counterweight inwards until the required weight is reached (Fig. 4).
Remark : the working pressure of the provided stylus is from the range 4 6 grams.
According to the cartridge manufacturer. All stylus has it own working pressure and
please refer to the specification respectively.
PLAYING RECORDS
This system includes a full-size, 2-speed, belt-drive turntable. You can play 33 & 45 rpm
records.
1. Press the “MODE button to enter the “PHONO” mode.
2. Make sure that you have removed the stylus cover from the stylus and have released the
tone arm lock that secured the tone arm to the tone arm rest.
3. Set the turntable speed selector to the desired speed 33 or 45 rpm. If you are playing 45
rpm ‘singles’, place the 45 rpm adapter on the centre spindle.
4. Place your record on the centre spindle.
5. Raise the tone arm lever to lift the tone arm off its rest. Move the tone arm to the edge of the
record. The turntable starts automatically. Use the tone arm lever to gently lower the tone
arm onto the record.
19


Need help? Post your question in this forum.

Forumrules
1

Forum

soundmaster-pl979

Reset search

  • When trying to play a cd the sound ain’t right can hear the music great but not the singing is this a fault. Submitted on 13-3-2022 at 21:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster PL979 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster PL979 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info