611459
17
Zoom out
Zoom in
Previous page
1/225
Next page
Vi5000/7000 User Manual
4.2.3: SCore CARD FRAME
®
4.2.3: SCore CARD FRAME
HARDWARE > LOCAL RACK > SCore CARD FRAME
FX Card
Provides the additional DSP and algorithms required to run the eight Lexicon digital FX processors.
Audio Clock Card
Provides clock connection to external equipment, both in and out. The wordclock input options are Video clock, stand-
ard wordclock or AES/EBU sync clock. Any of these can be used as a wordclock source for the console. The console
permanently outputs standard wordclock and AES/EBU wordclock for sync purposes.
DANTE Card
DANTE audio networking I/O - normally used for recording. See the appendix 2 at the end of this manual for
operation of the DANTE card.
MADI Cards
Up to 64 channels of MADI digital audio inputs and outputs, either via optical or CAT-5e-type connections, depending
on the options tted to the console. Each card has redundant (AUX) connections.
The left-hand (rst two) MADI card slots are recording and/or additional connection options. The right-hand MADI
cards are for connection to Vi Stageboxes. For convenience, these should be connected to the Stagebox breakout
panel.
HD Cards
Communicate with the rst two DSP Pro cards on the top row of cards. They pass digital audio along with control data
and status information about the cards loaded into the frame. Each pair of links can handle up to 192 channels in both
directions, giving a total I/O capacity for the rack of 384 channels. The HD card is responsible for working out what
cards are loaded into the system and conguring it accordingly. The RECONFIG button on the front panel of the Local
Rack will force a re-polling of the loaded cards to recongure the console.
MIC Card
Provides 4 x Mic input for Talkback and local Mic input. The card has 8 indicators, 4 indicators for signal present at the
mic input and 4 indicators for the phantom power status. The D-Sub connector should be connected to the
corresponding I/O MIC CARD S-Sub connector on the rear of the Active Breakout Unit.
BLU Link Card
The console uses the BLU Link digital audio networking protocol to connect local audio I/O to the Active Breakout
Unit. The BLU Link input and output on the BLU Link card should be connected to the BLU Link output and input
(respectively) on the rear of the Active Breakout Unit. Note that the BLU Link card that is connected to the Active
Breakout Box is not intended to be connected to other Harman BLU Link audio devices. Other BLU link cards may be
tted in the local rack’s congurable slots if connection to a BLU Link network or device is required.
Merger Card
The D-type connectors on this card are not used. This card is used only for internal communications.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 5000 in the language / languages: English as an attachment in your email.

The manual is 18,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info