611459

Soundcraft Vi 5000 Manual

16
Zoom out
Zoom in
Previous page
1/225
Next page
Vi5000/7000 User Manual
4.2.3: SCore CARD FRAME
®
4.2.3: SCore CARD FRAME
HARDWARE > LOCAL RACK > SCore CARD FRAME
The rear panel of the SCore shows the Score Card Frame. Your console’s Card Frame will be populated according
to your own specication. The diagram shows a 96kHz-capable system with four MADI cards installed. A 48kHz-only
system has ve DSP cards installed in the top section, with three additional ‘blank’ spaces (left of bridge card, left of
FX card, right of FX card). ‘Standard’ cards are shown with a blue background, optional cards (including the three
96kHx-system DSP cards) are shown with an orange background.
There are a number of connections that must be made in the Score Rack Frame, and between the SCore Rack Frame
and the Active Breakout Unit, in order for the system to operate correctly. These are shown in section 4.2.4.
There are 12 single slots for I/O cards, identied with letters A-L, the HD cards are not included in these 12 slots.
Double-slot cards such as MADI and Dante take the letter of their left-hand single slot.
GPIO Card with Relay Contacts
Provides a set of GPIO contacts, controlled by the GPIO page of the control surface, The inputs are opto-isolated and
the outputs are SPST relay contacts.
DSP Cards
Contains the DSP processing for audio processing in the SCore. A 96kHz-capable system will have eight DSP cards
while a 48kHz-only system will have ve DSP cards. The left-most DSP cards (1 & 2) must be connected to the HD
cards 1 & 2: HD IN 1 > HD OUT 1; HD IN 2 > HD OUT 2 and so on.
Bridge Card
Provides the connection from the Local Rack to the Control Surface. Houses a QNX embedded processing system
that controls all the audio processing in the rack. The Primary Bridge Card connection should be connected to the
Primary Bridge Card connection on the rear of the Active Breakout Unit.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 5000 in the language / languages: English as an attachment in your email.

The manual is 18,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info