611458
181
Zoom out
Zoom in
Previous page
1/202
Next page
Spread
Adjust reverb onset and
sustain.
Low Spread settings result in a rapid onset of reverber-
ation at the beginning of the envelope, with little or no
sustain. Higher settings spread out both the build-up and
sustain.
Dependant
on algorithm.
Dependant on
algorithm.
Reverb High
Cut Range Low Range High
Set the frequency of a
6dB/octave low-pass
lter on the reverberat-
ed signal.
It does not attenuate the reections. High frequencies
are often rolled off with this parameter, resulting in more
natural-sounding reverberation. Setting a low frequency
for this parameter can actually shorten the reverb time,
as it damps the audio as it recirculates.
1kHz 20kHz
High Cut Range Low Range High
Adjust the amount of
high frequency content
in the reverberation
tails.
Higher frequency settings increase high frequency
response, creating brighter reverbs; lower frequency
settings create darker reverbs with more bass frequency
emphasis.
1kHz 20kHz
Bass Boost
Frequency Range Low Range High
Set the frequency at
which the transition from
Mid Rt to Low Rt takes
place
This control should be set at least two octaves higher
than the low frequency you want to boost. For example,
to boost a signal at 100Hz, set Bass Boost Frequency
to 400Hz. (This setting works well for classical music.)
Crossover works best around 400Hz for boosting low
frequencies, and around 1.5 kHz for cutting low frequen-
cies.
100Hz 2kHz
Bass Boost
Ratio Range Low Range High
Boost or cut frequencies
below the Bass Boost
Frequency.
The amount of boost or cut required is highly dependent
on the material being processed.
0.2 4
Early Reec-
tion Time Range Low Range High
Adjust the amount of
time before reverb early
reections occur.
1mS 150mS
Vi3000 USER MANUAL
®
17.2.1 17.2.1: FX > ALGORITHMS > REVERBS
17.2.1: FX > ALGORITHMS > REVERBS
181


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info