611458
180
Zoom out
Zoom in
Previous page
1/202
Next page
4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser
Pre Delay Range Low Range High
Adjust time delay
between the source
signal and the onset of
reverberation.
This control is not intended to precisely mimic the time
delays in natural spaces, as the build-up of reverberation
is gradual, and the initial time gap is usually relatively
short. For the most natural effect, the Pre Delay values
should be set in the range of 10-25 milliseconds. How-
ever, if a mix is very busy or overly cluttered, increasing
the Pre Delay time may help clarify it, and set each
instrument apart from each other.
0mS 100 / 200mS
Reverb Time
Adjust the amount of
time the reverb can be
heard.
Higher settings increase reverberation times which are
usually associated with larger acoustical environments,
but can decrease intelligibility. Lower settings shorten re-
verb times and should be used when a smaller apparent
space or a more subtle effect is desired.
Dependant
on algorithm.
Dependant on
algorithm.
Size
Build-up rate of diffusion
after the initial period
(which is controlled by
Diffusion).
The Size control changes reverb sound from very large
to very small. Generally, set this control to the approx-
imate size of the acoustic space being created, before
adjusting anything else. The size in meters is roughly
equal to the longest dimension of the space. Audio is
temporarily muted when Size is changed.
Dependant
on algorithm.
Dependant on
algorithm.
Diffusion
Initial echo density.
High settings of Diffusion result in high initial echo
density, and low settings cause low initial density. In a
real-world situation, irregular walls cause high diffusion,
while large at walls cause low diffusion. For drums and
percussion, try using higher Diffusion settings.
Dependant
on algorithm.
Dependant on
algorithm.
Shape
Adjust the 'contour'
of the reverberation
envelope.
With Shape all the way down, reverberation builds
explosively, and decays quickly. As Shape is advanced,
reverberation builds up more slowly and sustains for the
time set by Spread. With Shape in the middle, the build-
up and sustain of the reverberation envelope emulates
a large concert hall (assuming that Spread is at least
halfway up, and that Size is 30 meters or larger).
Dependant
on algorithm.
Dependant on
algorithm.
Vi3000 USER MANUAL
®
17.2.1 17.2.1: FX > ALGORITHMS > REVERBS
17.2.1: FX > ALGORITHMS > REVERBS
Reverb Parameters
180


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info