611458
106
Zoom out
Zoom in
Previous page
1/202
Next page
Vi3000 USER MANUAL
®
11.4 11.4: SOLO > FOLLOW OUTPUT SOLO
11.0: SOLO System
Output Solo, and it will also display the EQ/Dyn/Misc touch screen area for the Soloed Output, on the Master section
touchscreen (in the space normally occupied by the Input Meter overview display).
• If Follow Solo IS active for either faders or Vistonics encoders, pressing a Group or Aux Output Solo/Sel will work
as described above, and will also switch the input channel faders or encoders to be assigned to the Soloed bus’s
contributing sends (equivalent to ‘Sends On Faders’ on some other consoles). The Faderglow colour will illuminate in
this case to indicate the type of bus contributions being assigned to the input faders: Orange for Aux sends and Green
for Group sends (although the faders themselves have no function with Group sends - only the channel ON keys are
used).
• If a Matrix Output Solo/Sel is pressed, regardless of the setting of Follow Solo modes, the Output Solo will be acti-
vated, the EQ/Dyn/Misc touch screen for the Matrix Output displayed, and the channel faders will be assigned to the
contribution levels from the Outputs to the Soloed Matrix Output. The Faderglow of input faders will change to Pale
Blue (Cyan) to indicate Matrix contributions are now being controlled.
Whilst an Output Solo is active, the [FLW] key can be pressed at any time to drop out of Follow mode and switch back
to channel faders for global level adjustments, and then pressed again to drop back into Follow mode for adjustments
to contribution mix again.
The [FLW] key for fader area is automatically switched on when you load the Monitor
Default Show, as this functionality is primarily intended for monitor mixing.
Note: the [FLW] key for fader area has an additional function in allowing VCAs to control the Aux sends of input chan-
nels. See chapter 9 for details.
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Vi 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Vi 3000 in the language / languages: English as an attachment in your email.

The manual is 17,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info