611474
44
Zoom out
Zoom in
Previous page
1/60
Next page
42 Soundcraft MFXi MPMi User Guide Issue 1210
USING YOUR MFXi/MPMi CONSOLE
The nal output from your sound system can only ever be as good as the
weakest link in the chain, and especially important is the quality of the
source signal because this is the starting point of the chain. Just as you
need to become familiar with the control functions of your mixer, so you
must recognise the importance of correct choice of inputs, microphone
placement and input channel settings. However, no amount of careful
setting up can take account of the spontaneity and unpredictability of
live performance. The mixer must be set up to provide “spare” control
range to compensate for changing microphone position and the absorp-
tion effect of a large audience (different acoustic characteristics from
soundcheck to show).
MICROPHONE PLACEMENT
Careful microphone placement and the choice of a suitable type of micro-
phone for the job is one of the essentials of successful sound reinforce-
ment. The diagrams on the left show the different pick-up patterns for
the most common types of microphone. Cardioid microphones are most
sensitive to sound coming from in front, and hypercardioid microphones
offer even greater directivity, with a small amount of pickup behind the
microphone. These types are ideal for recording vocalists or instruments,
where rejection of unwanted sounds and elimination of feedback is impor-
tant. The aim should be to place the microphone as close as physically
possible to the source, to cut out unwanted surrounding sounds, allow a
lower gain setting on the mixer and avoid feedback. Also a well chosen and
well placed microphone should not need any appreciable equalisation.
There are no exact rules - let your ears be the judge. In the end, the
position that gives the desired effect is the correct position!
INITIAL SETUP
Once you have connected up your system (see the sections on connec-
tion and wiring earlier in this manual for guidance) you are ready to set
initial positions for the controls on your mixer.
Set up individual input channel as follows:
• Connect your sources (microphone, keyboard etc.) to the required
inputs.
WARNING: Phantom powered mics should be connected before the
+48V is switched on. Ensure the PA system is OFF when switching
phantom power on or off.
Set Master faders at 0, input faders at 0, and set power amplier
levels to about 70%.
• Provide a typical performance level signal and press the PFL button
on the rst channel, monitoring the level on the bargraph meters.
• Adjust the input gain until the meter display is in the amber section,
with occasional peaks to the rst red LED at a typical maximum
source level. This allows sufcient headroom to accommodate
peaks and establishes the maximum level for normal operation
(but see note below).
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft MPMi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft MPMi in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundcraft MPMi

Soundcraft MPMi User Manual - German - 35 pages

Soundcraft MPMi User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info