Manual Soundcraft MPMi (page 26 of 60) (English)

611474

Zoom out

Zoom in

1/60

24 Soundcraft MFXi MPMi User Guide Issue 1210

8 FX SEND (MFXi only)

This control sets the level of the post-fade signal being sent to the FX bus; from there it is routed

to the FX processor. The FX Send is xed post-fader.

9 PAN

This control sets the amount of the channel signal feeding the Left and Right MIX buses, allowing

you to move the source smoothly across the stereo image. When the control is turned fully left or

right you are able to route the signal at unity gain to either left or right outputs individually.

10 MUTE

All outputs from the channel (except inserts) are on when the MUTE switch is released and muted

when the switch is down, allowing levels to be pre-set before the signal is required. The MUTE switch’s

inbuilt LED glows when the channel is muted.

11 INPUT CHANNEL FADER

The 60mm FADER gives you smooth control of the overall signal level in the channel strip, allowing

precise balancing of the various source signals being mixed to the Master Section. It is important

that the input level is set correctly to give maximum travel on the fader which should normally be used

at around the “0” mark. See the “Initial Setup” section on page 42 for help in setting the right level.

12 PFL

When the latching PFL switch is pressed, the pre-fade pre-mute signal is fed to the headphones,

control room output and meters, where it replaces the MIX. The SOLO LED on the Master section

illuminates to warn that a PFL is active. This is a useful way of listening to any required input sig-

nal without interrupting the main mix, for making adjustments or tracing problems. When PFL is

pressed anywhere on the console, the Control Room outputs automatically switch from monitoring

the Mix Outputs.

13 PEAK LED

This LED will light when the signal level approaches clipping at any of the three monitored points:

PRE-EQ, POST-EQ and POST-FADE.

14 SIGNAL PRESENT (SP) LED

The SP LED glows when a signal is present. The feed point for the LED is pre-EQ.

15 MIX/SUB

When this switch is up, the channel’s post-pan-pot signal is routed to the Mix (left and right) buses.

When the switch is depressed, the post-pan-pot signal is routed to the Sub-group (left and right)

buses.

It is sometimes useful to route several inputs to the sub-group buses, e.g. all the mics for a drum

kit, or all the vocal mics for a choir. These signals can then be fed to the main mix at the master

section. By doing this the levels of all of the grouped inputs can be changed together by using the

group faders instead of having to adjust all of the individual input faders, although, of course, the

individual channel faders will have to be adjusted to start with.

MIC

15 15

750

150

3.5k

GAIN

PFL

MIX

SUB

-5

-10

-20

-30

MUTE

AUX1AUX1

AUX2

AUX3

PAN

LINE

INSERT

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft MPMi in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundcraft MPMi

Soundcraft MPMi User Manual - German - 35 pages

Soundcraft MPMi User Manual - French - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Soundcraft MPMi Manual

Product: