611476
17
Zoom out
Zoom in
Previous page
1/48
Next page
17
14 FADER
The 100mm FADER allows precise balancing of the various source signals being mixed to the selected
outputs. You get most control when the input Sensitivity is set up correctly, giving full travel on the fader. See
the ‘Initial Setup’ section on page 31 for help in setting a suitable signal level.
15 DIRECT OUTPUT (Rear Connector Panel)
Each channel has a dedicated Direct Output which allows direct connection to external devices, for example
to feed Tape Machines or effects units.
The pre-fade direct output level may be monitored by pressing the SOLO switch on the appropriate channel
(with the mixer in PFL mode) to feed the pre-fade signal to the monitors and the bargraph meters.
16 DIR. PRE
The Direct Outputs are normally POST-FADE for use as effects sends or to provide fader control of recording
levels in a studio recording application. For live recording the outputs can be individually changed to PRE-
FADE by pressing this switch, so that the direct output level remains unaffected by fader settings for the main
PA mix.
17 INSERT POINT (Rear Connector Panel)
The unbalanced, pre-EQ insert point is a break in the channel signal path, allowing limiters, compressors,
special EQ or other signal processing units to be added in the signal path. The Insert is a 3-pole A gauge jack
socket which is normally bypassed. When a jack is inserted, the signal path is broken, just before the EQ
section. The Send may be tapped off as an alternative pre-fade, pre-EQ direct output if required, using a lead
with tip and ring shorted together so that the signal path is not interrupted.
Inserts can also be used to send and return from a multitrack tape machine.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft FX 16ii at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft FX 16ii in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundcraft FX 16ii

Soundcraft FX 16ii User Manual - German - 48 pages

Soundcraft FX 16ii User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info