611477

Soundcraft Compact Stagebox Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
Soundcraft Compact Stagebox User/Installation GuidePage 10
Input Modules
Input modules handle 16 x mic/line amp, phantom power and A-to-D converter. An LED per input indi-
cates whether the phantom power is activated.
Output Modules
There are two different output module types available, both handling 16 outputs in total. In the standard
conguration, an output module with 8 x D-to-A converters and electronically balanced line outputs as
well as 8 AES/EBU output channels is tted. An all-analogue line output module with 16 electronically
balanced line outputs is optionally available. The modules have a set of relays which will mute the outputs
if the power fails.
LED Status Indicators
Status indicator LEDs are available for power rails, IO modules, fan and temperature alarm, and a RECON-
FIG button that must be pressed after the card conguration has been changed.
MADI HD Link Card
This card provides the audio and control connections to the console through either a Cat-5 or an Optical-
bre MADI link. The corresponding MADI card in the console transmits the clock for the Compact Stagebox
down the MADI stream. The second input on the card can either be used to provide a redundant connec-
tion to the console, or to connect to a second system if two consoles are used for a monitor/FOH congu-
ration.
The MADI card indicates its clock status with the ‘LOCK’ LED on the card. An RS422 link output is also
tted, allowing transmission of RS422 data via a ‘pipeline’ within the MADI stream from a corresponding
port on the console’s MADI card for remote RS422 control. (This feature is supported by Vi-Series con-
soles only).
For single cable operation: The front panel toggle switch must be set to either ‘MAIN’ or ‘AUX’,
depending on which socket is being used.
For dual cable (redundant) operation: The front panel toggle switch must be set to ‘RED’
mode.
Refer to the illustrations on the following pages.
Expansion Slots K and L (for optional D21m Cards)
In these slots one or two additional input or output cards may be installed (refer to page 8 for available
cards, page 16 for installation details). For more information on the D21m cards please refer to the ‘Vi
IO Option Cards Technical Information’ document available from www.soundcraft.com in the ‘Downloads’ -
‘User Guides’ - ‘Soundcraft Vi1’ area.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Compact Stagebox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Compact Stagebox in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info