812340
32
Zoom out
Zoom in
Previous page
1/44
Next page
Last AL heat
This displays when the last successful heating has occurred.
AL sensor 1
On this sensor, the temperature of the AL function is measured.
AL Sensor 2
Optional AL sensor
If this sensor is set for a successful heating Tset AL have to be achieved at this sensor too for the action time.
Solid fuel boiler
This function is used to try to cool down storage to an adjustable reference temperature by transporting heat or by using a tem-
perature and time controlled air conditioning installation.
Solid fuel boiler Tmin
Minimum temperature in the solid fuel boiler to switch on the pump. If the temperature at the boiler sensor is below this tem-
perature, the relay is disabled.
Solid fuel boiler Tmax
Maximum temperature in the storage. If this is exceeded, the relay is switched off.
ΔT Solid fuel boiler
Switch on and switch off condition for the temperature difference between boiler and storage.
Switch on temperature difference Δ T SF
Switch off temperature difference Δ T SF
Boiler sensor
This determines the sensor that is used as boiler sensor.
Storage sensor
This determines the sensor that is used as storage sensor.
Anti Legionella
see " Anti Legionella " on page 31.
Burner
This function requests a burner if T-target of the thermostat function (see " Tref " on page 30) is not met until T-target + hysteresis
is reached or if a request of the heating circuit or the process water is present. Depending on the request, the burner will turn on
in a more economic manner in the Eco-Mode if the solar circulation pump is running.
Burner sensor
The sensor to be selected as the reference sensor for the burner function. If Tref is not met on this sensor, the burner will turn on.
DHW request
The burner is started for a DHW - heat request.
HC request
The burner is started with a heating circuit - heat request.
Delay
Switch delay, valid for cooling and heat request. The burner first turns on after this time span if the switch conditions were
reached and are still present. This function should prevent unnecessary switches through temperature changes or create a regen-
erative energy source that adds energy.
Eco mode (during solar charge)
The economy mode for this function can be operated in 2 different variants:
Shutdown: The function is not started with an active solar charge.
Decrease:
For a heating request the function first turns on when the conditions and an additional offset were not met.
For a DHW request the function only activates when T eco is not met and de-activates when T eco + DHW-heating is achieved.
Tmax
Maximum temperature at the burner sensor. If this temperature at the set sensor is exceeded, the burner is shut down.
32
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel XHCC S61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel XHCC S61 in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel XHCC S61

Sorel XHCC S61 User Manual - German - 44 pages

Sorel XHCC S61 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info