812409
31
Zoom out
Zoom in
Previous page
1/40
Next page
31
12.3 Sensor calibration Menus 7.3 / 7.3.1 - 7.3.3
Deviations in the temperature values displayed, for example due to cables
which are to long or sensors which are not positioned optimally, can be
compensated for manually here. The settings can be made for each indi-
vidual sensor in steps of 0.5°C.
Offset S1...S6 per setting range: -50°C...+50°C default setting: 0°C
Caution
Settings are only necessary in special cases at the time of initial
commissioning by the specialist. Incorrect measurement values
can lead to unpredictable errors.
Special functions Menu 7
12 12
12.4 Commissioning Menu 7.4
Starting the commissioning help guides you in the correct order through the
basic settings necessary for commissioning, and provides brief descriptions
of each parameter in the display.
Pressing the “esc” key takes you back to the previous value so you can
look at the selected setting again or adjust it if desired. Pressing the “esc”
more than once takes you back to the selection mode, thus cancelling the
commissioning help. (see also 5.1)
Caution
May only be started by a specialist during commissioning! Ob-
serve the explanations for the the individual parameters in these
instructions, and check whether further settings are necessary for
your application.
12.5 Factory settings Menu 7.5
All of the settings that have been made can be reset, thus returning the
controller to its delivery state.
Caution
The entire parametrisation, statistics, etc. of the controller will be lost
irrevocably. The controller must then be commissioned once again.
12.6 Expansions Menu 7.6
This menu can only be selected and used if additional options or expansion
modules have been built into the controller.
The associated supplementary installation, mounting and operation
instructions are then included with the speci c expansion.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel WPC5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel WPC5 in the language / languages: English as an attachment in your email.

The manual is 2.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel WPC5

Sorel WPC5 User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info