812385
48
Zoom out
Zoom in
Previous page
1/56
Next page
48
The maximum speed of the pump at relay R1 is speci ed here. During the setting the
pump runs at the speci ed speed and the ow rate can be determined.
Setting range: from 70 to 100%/default setting: 100%
7.9.5. - Max. speed
The minimum speed of the pump at relay R1 is speci ed here. During the setting the
pump runs at the speci ed speed and the ow rate can be determined.
Setting range: from 30 to max. speed -5%/default setting: 50%
7.9.6. - Min. speed
This value is the control setpoint for variant 3. If the value at the collector sensor drops
below this, the speed is reduced. If it rises above this, the speed is increased.
Setting range: from 0 to 90°C/default setting: 60°C
7.9.7. - Setpoint
Caution
The indicated percentages are guide values that may vary to a greater
or lesser extent depending on the system, pump and pump stage.
Caution
The indicated percentages are guide values that may vary to a greater
or lesser extent depending on the system, pump and pump stage.
Special functions
Pumps with for example cable break detection need a minimum voltage even when
switched off. This minimum voltage can be set here.
Settings range: 0-1,5V /Default: 0V
7.9.8. - Pump U0 / Pump PWM0
This is used to set the maximum voltage/frequency for the highest speed level of the
high ef ciency pump, which is used e.g. for purging or manual operation.
Settings range: 60 - 100% / Default: 100%
7.9.9. - Pump U100 / Pump PWM100
Caution
Depending on the pump used, it might be necessary to adjust Pump U0
and Pump PWM0 to set the signal that is send by the controller to the
pump. Some pumps will register zero voltage as cable break and start
without any need.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel TDC 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel TDC 4 in the language / languages: English as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel TDC 4

Sorel TDC 4 User Manual - German - 56 pages

Sorel TDC 4 User Manual - Dutch - 56 pages

Sorel TDC 4 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info