812385
47
Zoom out
Zoom in
Previous page
1/56
Next page
47
Special functions
Technical data 0-10V:
0-10V: 2V bis 10V (20% bis 100%)
for 10 k working resistance
10V = 100% speed
5V = 50% speed
2V = 20% speed
0V = Off
Caution
Relay 1 is running simultanously with the PWM/0-10V signal with the
same speed (phase control), so a standard pump can be used together
with the PWM/0-10V pump.
Caution
If the main voltage ( 230V) of the 0-10V/PWM pump has to be done with
the controller, R3s special function can be used (see 7.10) and set that
it switches with R1. This is speci cally for the 230V mains of the 0-10V/
PWM pump, in no case for the Low Voltage part.
Relay 1 can in no case be used for the main voltage of the 0-10V/PWM
pump!
Caution
During this time the pump starts up at its full speed (100%) to ensure reliable starting.
Only after this purging time does the pump run with speed control and switches to the
max. or min. speed, depending on the variant set.
Setting range: from 5 to 600 seconds/default setting: 8 seconds
7.9.3.Purging time
The control time is used to determine the delay for speed control in order to avoid
large temperature oscillations as much as possible. The time span required for a com-
plete control process from minimum speed to maximum speed is entered here.
Setting range: from 1 to 15 minutes/default setting: 4 minutes
7.9.4. - Sweep time
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel TDC 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel TDC 4 in the language / languages: English as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel TDC 4

Sorel TDC 4 User Manual - German - 56 pages

Sorel TDC 4 User Manual - Dutch - 56 pages

Sorel TDC 4 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info