812382
27
Zoom out
Zoom in
Previous page
1/40
Next page
27
5.11 Tmax S3
Switch-off temperature at sensor 3
If this value is exceeded at sensor 3 and the other conditions are also met, then the
controller switches the relay off. If sensor 3 falls below this value again and the other
conditions are also met, then the controller switches the relay on again.
Setting range: from 0°C to 99°C
Default setting: 60°C (in systems not using S3: Default Off)
Danger
Temperature values which are set too high can lead to scalding or dam-
age to the system. Scalding protection must be provided by the cus-
tomer!
Settings
5.12 Hysteresis
Hysteresis of thermostat function via S3
Sets the hysteresis for the heating of the storage by thermostat. When Tref S3 at sen-
sor 3 is exceeded by the set hysteresis, additional heating at R2 is switched off.
In Energy saving mode (see 5.9) additional heating runs till TecoS3 + hysteresis is
reached.
Settings range: 2°C to 20°C / Default: 10°C
Hysteresis of the cooling function via S3
Sets the hysteresis for the cooling function of the storage. If the temperature at S3
drops below Tref S3 by this value, cooling at R2 is switched off.
Settings range: 2°C to 20°C / Default: 10°C
5.10 TecoS3
Minimum temperature S3 in Energy saving mode
In the hydraulic variants “Solar+thermostat” and “Sol+therm+valve3”, TecoS3 is the
minimum temperature at S3 for the thermostat in Energy saving mode. If the tempera-
ture drops below this value and the thermostat is enabled (see “thermostat times”), R2
is activated till the temperature reaches TecoS3 + hysteresis (see hysteresis).
Settings range: 0°C to 99°C / Default: 20°C
5.9 Energy saving mode
Energy saving mode for the thermostat function
In energy saving mode the additional heating via R2 is switched on at TecoS3 and
heats up to Teco+hysteresis. When energy saving mode is active, but no solar heat is
available, TsetS3 is used like in normal mode.
Settings range: On, Off/ Default: Off
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel TDC 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel TDC 1 in the language / languages: English as an attachment in your email.

The manual is 0.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel TDC 1

Sorel TDC 1 User Manual - German - 40 pages

Sorel TDC 1 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info