812335
15
Zoom out
Zoom in
Previous page
1/24
Next page
4. Operating mode
To specify the operating modes for the heating circuit. After an interruption of
the mains voltage, the controller automatically returns to the last operating
mode selected.
Only in automatic mode does the controller use the set operating
times and the correspondingly set target flow temperatures!
Heating Circuit
Auto = Automatic/Normal mode using the set times.
Continuous Day = The set values for day mode are used.
Continuous Night = The set values for night mode are used.
Reference Value = Fixed flow temperature regardless of the outdoor temperature. The desired flow temperature must be set in
Menu 4.3 .
Reference value = Menu 4.4 can be used to set specific flow temperatures for the next 14 days. After 14 days, the reference tem-
perature of the 14th day is used continuously until the operating mode is changed. Different temperature values can be set in
menu 4.4 for every individual day.
Off = Heating circuit is switched off (except Frost protection)
Manual
In ‚Manual‘ mode, the individual relay outputs and the connected consumers can be checked for proper functioning and correct
assignment.
The operating mode Manual‘ may only be used by specialists for brief function tests, e.g. during commissioning! Func-
tion in manual mode: The relays and thus the connected consumers are switched on and off by pressing a key, with no
regard to the current temperatures and set parameters. At the same time, the current measurement values of tem-
perature sensors are also shown in the display for the purposes of function control.
Heating Circuit Reference
If operating mode Reference value is selected, see " Heating Circuit " on page 15, the reference flow temperature must be set
here, regardless of the curve and outdoor temperature.
14-day Reference
If operating mode‚ 14-day reference value is selected see " Heating Circuit " on page 15, the reference flow temperature for each
of the 14 days can be set here. In Menu 4.4.1, the starting time of the program is shown. To restart the reference program, press
restart‘.
Pressing restart again will reset the 14-day reference program and restart it at Day 1.
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel MHCC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel MHCC in the language / languages: English as an attachment in your email.

The manual is 3.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel MHCC

Sorel MHCC User Manual - German - 24 pages

Sorel MHCC User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info