812334
24
Zoom out
Zoom in
Previous page
1/28
Next page
Room Controller
Room Controller
This value is used to appoint the amount of influence the room temperature has on the reference flow temperature, as a percentage. For
each degree deviation between room temperature and set point temperature, the percentage set here is added from the calculated set
flow temperature to the set flow temperature or subtracted from it until the min. or max flow values.
Example: Reference room temp.: e.g. 25 °C; room temp.: e.g. 20 °C ±5 °C. Calculated reference temp.: e.g. 40 °C: room controller: 10
%= 4 °C 5 X 4 °C= 20 °C. Accordingly, 20 °C are added to the reference flow temperature, giving 60 °C. If the value is higher than the
one set in max. flow temp, the resulting temperature is the one set in max. flow temp.
Room Reference Day
The desired room temperature for day mode.
In combination with the %-value set under "room controller", the difference between reference and actual room temperature influences
the reference flow temperature. If the room controller is set to 0 %, this function is deactivated.
For °CALEON room controller without influence.
Room Reference Night
The desired room temperature for night mode.
In combination with the %-value set under "room controller", the difference between reference and actual room temperature influences
the reference flow temperature. If the room controller is set to 0 %, this function is deactivated.
For °CALEON room controller without influence.
In the mode Set point program, the room controller has no influence.
Thermostat (X)
The room controller or sensor input is selected here.
When using a °CALEON: select the room set in the °CALEON.
When using an RC21: select RC21-local 1
When using an RC20 or other thermostats and seasonal switches: select the sensor input used here and then select the exact function
under "sensor type".
Eco Display Mode
In Eco Display Mode the backlight of the display is switched off if no buttons are pushed for 2 minutes.
If a message exists, the backlight does not switch off until the message has been scanned by the user.
Network
If necessary, the network settings of the connected data logger must be set.
Access Control
This menu lets you give up to 4 users access to the data logger. The users that are registered then have access to the controller or
respectively the data logger.
To add a user in the list, select <add user>. Leave the now visible menu open und connect to the address of the connector or respect-
ively the data logger. Your user name is going to appear in this menu and can be selected and confirmed with ‘OK’.
Note
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel MHCC 24V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel MHCC 24V in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel MHCC 24V

Sorel MHCC 24V User Manual - German - 30 pages

Sorel MHCC 24V User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info