812334
7
Zoom out
Zoom in
Previous page
1/28
Next page
Wall Installation
1. Unscrew cover screw completely.
2. Carefully pull upper part of housing from lower part.
During the removal, the brackets are released as
well.
3. Set upper part of housing aside. Do not touch the
electronics.
4. Hold the lower part of the housing in the selected
position and mark the 3 mounting holes. Make sure
that the wall surface is as even as possible so that
the housing does not become distorted when
screwed on.
5. Using a drill and size 6 bit, drill three holes at the
points marked on the wall and push in the plugs.
6. Insert the upper screw and screw it in lightly.
7. Fit the upper part of the housing and insert the
other two screws.
8. Align the housing and tighten the three screws.
1. Open the terminal cover.
2. Strip lines a max. of 55 mm, assemble the strain
reliefs, strip wire ends 8-9 mm (Figure 1)
3. Open the terminals with a fitting screwdriver (figure
2) and connect the electrical system to the con-
troller.
4. Clip on the terminal cover again and close it with
the screw.
5. Turn on mains supply and put the controller into
operation.
If problems occur with the operation of the terminals, our video on our YouTube page can help you:
http://www.sorel.de/youtube
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel MHCC 24V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel MHCC 24V in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel MHCC 24V

Sorel MHCC 24V User Manual - German - 30 pages

Sorel MHCC 24V User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info