812374
40
Zoom out
Zoom in
Previous page
1/50
Next page
Charge time
When solar charging begins, the connected booster pump fills the system for the time set here.
Parallel operation R1/R2
The relay is switched on at the same time as the set relay R1 or R2.
Parallel operation
Here you can additionally set the switch mode.
On : The function switches parallel to the set signal output.
Inverted : The function switches contrary to the set signal output.
Delay
In this menu, it is set how long to wait after switching the signal output until the parallel operated relay switches as well.
Follow-up time
In this menu, it is set how long the parallel-operated relay continues to operate after the set signal output has been deactivated.
Always on
Relay is permanently switched on.
Heating circuit
A heating circuit pump with fixed hysteresis (+/- 1 °) controlled to achieve the target value. A delay of 30 seconds of activation/ deactivation is
fixed to prevent shocks. The RC21 room controller can be used as room sensor.
Room sensor
Select the reference sensor for the room temperature.
Room Reference (Night)
Set room temperature for the night-time mode If the temperature is exceeded at the room sensor outside the set times, the relay will turn off.
Room Reference (Day)
Set room temperature for the daytime mode If the temperature is exceeded at the room sensor at the set times, the relay will turn off.
Release Times
Thermostat activity times
Set the desired periods of time when the thermostat should be active. For each weekday, three times can be specified, furthermore, you can
copy individual day to other days. Outside the set times the thermostat is switched off.
Heat quantity
Constant flow
If “Constant flow” is activated as the type of heat quantity metering, the approximate heat from the manually entered values for antifreeze, its
concentration and the flow from the system and the measured sensor values from the collector and storage are calculated. Additional inform-
ation about antifreeze, its concentration and the flow of the system is required. Additionally through the setting offset ∆T, a correction factor
can be set for the heat quantity collection. Since the collector temperature and the storage temperature can be used for the heat quantity
metering, depending on the system, there may be deviations from the displayed collected temperature to the actual previous temperature or
the displayed storage temperature to the actual return temperature. Through the setting Offset ∆T, this deviation can be corrected.
Example: displayed collector temperature 40°C, read previous temperature 39°C, displayed storage temperature 30°C, read return tem-
perature 31° means a setting of -20% (displayed ∆T 10K, actual ∆T 8K => -20% correction value)
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel LTDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel LTDC in the language / languages: English as an attachment in your email.

The manual is 5.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel LTDC

Sorel LTDC User Manual - German - 50 pages

Sorel LTDC User Manual - Dutch - 36 pages

Sorel LTDC User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info