812374
39
Zoom out
Zoom in
Previous page
1/50
Next page
If the temperature at the solid fuel boiler sensor exceeds the temperature set here, the relay switches on the pump, if the other starting con-
ditions are met.
Below the solids boiler Tmin temperature, the solids boiler function is deactivated.
ΔT Solid fuel boiler
Switch-on and switch-off difference between solid fuel boiler (FFS) and storage tank.
If the temperature difference between the sensors defined for this function exceeds the value set here (ΔT FS On), the function switches
on the assigned output (relay or signal output).
If the set temperature difference (ΔT FS Off) between the solids boiler and the storage tank is below, the function switches off the assigned
output (relay or signal output).
Solid fuel boiler Tmax
Maximum temperature in storage tank. If this is exceeded, the relay is switched off.
Boiler sensor of this function
Sensor used as a solids boiler sensor. Considered for SF Tmin and ΔTon/off.
Storage sensor
Sensor used as a storage tank sensor. Considered for FS Tmax and ΔTon/off.
Error Messages
The relay is switched on if one or several of the set protective functions are activated. This function can be inverted so that the relay is
turned on (Duration on) and then turned off again if a protective function is activated.
Error message
Activate or deactivate function.
The additional function error message activates the relay for certain events and only deactivates again when the information message to
each event was read.
Pressure monitor
In this menu, the system pressure monitoring can be activated through a direct sensor. As soon as the set pressure conditions are under-
shot or exceeded, the set relay will switch on.
Pressure monitor
Relay turns on if the pressure goes below the minimum or exceeds the maximum.
RPS-Type
Type of pressure sensor
In this menu, you can adjust which pressure sensor is being used. Please note: If e.g. VFS1 is connected, RPS1 option is not shown.
RPS Min
Minimum pressure. If this pressure is not met, the controller emits an error notification and the relay switches.
RPS Max
Maximum pressure in the system. If this pressure is exceeded, the controller emits an error notification and the relay switches.
Booster Pump
An additional booster pump can be activated with this function if the primary pump is no longer sufficient.
Booster Pump
Activate function.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel LTDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel LTDC in the language / languages: English as an attachment in your email.

The manual is 5.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel LTDC

Sorel LTDC User Manual - German - 50 pages

Sorel LTDC User Manual - Dutch - 36 pages

Sorel LTDC User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info