734406

Sopur Xenon 2 FF Manual

44
Zoom out
Zoom in
Previous page
1/120
Next page
ENGLISH
XENON 2 FF 44 Rev.3.0
4.0 Handling
Folding up
First remove the seat cushion from the wheelchair and flip up the (platform)
footplate. Take hold of the sling or the seat tubes (Fig.4.1) in the middle, from
the back, and pull it upwards until the folding bracket (Fig.4.2) clicks into place.
Transport
To move the mobility aid, the folded wheelchair should be lifted by holding the
front part of the cross-brace and the push handles.
Unfolding
Push the release lever of the folding bracket (Fig.4.3) downwards and push
both frame halves apart. Then press on the seat tube (see figure). Your
wheelchair is then unfolded. Now snap the seat tubing into position in the seat
saddle. This can be facilitated by slightly tipping your wheelchair to the side, as
this means that the weight is taken off one of the rear wheels. Be careful not to
get your fingers caught in the cross-tube assembly. Fit the seat cushion.
(Fig.4.4).
Getting into your wheelchair on your own (Fig.4.5)
• Push the wheelchair to a wall or a solid piece of furniture;
• Apply the wheel locks;
• Flip the footplates up;
• The user can lower themselves into the wheelchair;
• Fold the foot plates back downwards and position your feet in front of the heel
loops.
Getting out of your wheelchair on your own (Fig.4.6)
• Apply the wheel locks;
• Fold the footplates upwards with your foot;
• With one hand on the armrest, the person should bend slightly forward, to
bring the body weight to the front of the seat, and then with both feet firmly on
the ground and one foot behind the other, push up into the upright position.
WARNING!
• Do not stand on the foot plates during transfers. The wheelchair is likely to tip
to the front when standing on the foot plates.
• Always place your feet securely on the ground for transferring into or out of the
wheelchair.
• Always engage the wheel locks when transferring in or out of the wheelchair.
Fig.4.1
Fig.4.6
Fig.4.5
Fig.4.4
Fig.4.3
Fig.4.2
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sopur Xenon 2 FF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sopur Xenon 2 FF in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info