543656
52
Zoom out
Zoom in
Previous page
1/68
Next page
52
Troubleshooting
Others
Indicators
Symptom Cause and Remedy
The fan is noisy. c Check the setting of “High Altitude Mode” in the Setup menu
(see page 38).
c Check the ventilation holes are not blocked.
c Make sure the room temperature is not too high.
To maintain the product reliability of the projector’s components,
the rotation speed of the fan increases and the fan becomes
slightly noisier, when the room temperature exceeds normal. The
approximate normal temperature is 25°C.
Symptom Cause and Remedy
The LAMP/COVER
indicator flashes in orange.
(Repetition rate of 2
flashes)
The lamp cover or the air filter cover is detached.
c Attach the cover securely (see page 47).
The LAMP/COVER
indicator flashes in orange.
(Repetition rate of 3
flashes)
The lamp has reached the end of its life.
c Replace the lamp (see page 46).
The lamp has reached a high temperature.
c Wait for 60 seconds to cool the lamp and then turn on the power
again.
The LAMP/COVER
indicator flashes in orange.
(Repetition rate of 4
flashes)
The shutter fails to operate properly.
c Consult with qualified Sony personnel.
ON/STANDBY flashes in
red. (Repetition rate of 2
flashes)
The internal temperature is unusually high.
c Check to see that nothing is blocking the ventilation holes.
The projector is being used at a high altitude.
c Ensure that “High Altitude Mode” in the Setup menu is set to
“On.
ON/STANDBY flashes in
red. (Repetition rate of 4
flashes)
The fan is broken.
c Consult with qualified Sony personnel.
ON/STANDBY flashes in
red. (Repetition rate of 6
flashes)
Unplug the AC power cord from the wall outlet after the ON/
STANDBY indicator goes out, plug the power cord to the wall
outlet, and then turn the projector on again. If the ON/STANDBY
flashes in red and the problem persists, the electrical system has
failed.
c Consult with qualified Sony personnel.
LAMP indicator 1 (2)
lights in orange.
The lamp must be replaced.
c Replace the specified lamp (Lamp 1 or 2) (see page 46).
* The lamp that needs to be replaced lights.
The lamp temperature has been high.
c Wait for more than 60 seconds so that the lamp cools, and then
turn on the power again.
* The lamp that has fails to light is shown.
The PIC MUTING
indicator lights in orange.
The projector is in muting mode.
c To cancel it, press the MUTING (PIC) key on the Remote
commander.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-FH300L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-FH300L in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info