578059
72
Zoom out
Zoom in
Previous page
1/83
Next page
A "V" appears on the screen.
The time code (or other time
counter indication)
superimposed on the
monitor is one frame behind.
The picture does not appear
in video EE mode.
No superimposed
information appears on the
monitor screen.
The monitor screen is too
bright.
The monitor screen is too
dark.
The video image is too dark
when editing a composite
video signal.
The TBC DELAY menu item is
set to "VIDEO DELAY".
A reference video signal is not
being input. Alternatively, the
input video signal is not
synchronized to the reference
signal
a)
.
The time code is being
displayed in the top third of the
screen.
The connector to which the
video signal is input does not
match the setting of the VIDEO
IN selector switch.
The CHARACTER switch is in
the OFF position.
The monitor is not connected to
the VIDEO 2 (SUPER)
OUTPUT connector.
The monitor INPUT connector
75 Q. termination switch is in
the OFF position, or there is no
terminating device.
The 75 Cl termination of the
video signal input is duplicated.
For example, when using the
REF. VIDEO INPUT connector
tor a loop-through connection,
the 75 a termination switches
of the REF. VIDEO INPUT
connector and the VIDEO
INPUT connector are both set
to the ON position.
Set TBC DELAY to "SYNC DELAY". (The UVW-
series has a built-in time base corrector. Therefore,
in editing mode or video EE mode, the output video
signal is delayed exactly 8 lines behind the
reference signal. This means that when the TBC
DELAY setting is "VIDEO DELAY", the video
appears 8 lines lower on the monitor, and a "V"
appears. However, even if the TBC DELAY item is
set to "SYNC DELAY", if the monitor is
synchronized to an external reference, a "V" also
appears. This is not a malfunction.)
Input a reference signal which is synchronized to
the input video signal. Alternatively, use the REF.
VIDEO INPUT connector on this unit in loop-
through mode, and connect to the player REF.
VIDEO INPUT. (In editing mode, the servo
synchronizes to the input video signal. Therefore, if
the input video signal and reference video signal
are not synchronized, the time base corrector and
servo will not synchronize, and therefore the picture
will break up. Recording in this condition, however,
will not affect the quality of the recording.)
Move the display position down. (When using a
superimposed time code, and recording on another
VTR avoid the top third of the screen. In the UVW-
series, the time code is superimposed as soon as
read, and therefore even discontinuous time
information such as user bit data can be displayed
with the minimum of delay. However, since the
new data value is still being processed while the
beam is scanning the top third of the screen, the
data from the previous frame appears if the time
code is diaplayed within this area.)
Make the setting of the VIDEO IN selector switch
match the connector to which the video signal is
input. When inputting a component signal, also set
the component input connector selection switch
correctly.
Set the CHARACTER switch to the ON position.
Connect the monitor to the VIDEO 2 (SUPER)
OUTPUT connector. (To display superimposed
information, the monitor must be connected to the
VIDEO 2 (SUPER) OUTPUT connector.)
Set the monitor INPUT connector 75 Q termination
switch to the ON position, or connect a terminating
device.
Set the 75 ft termination switch of the connector
being used for a loop-through connection to the
OFF position.
a) In this state an alarm message appears on the monitor screen and time counter display.
Chapter 9 Operational Problems 9-5 (E)
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony UVW-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony UVW-1800 in the language / languages: English, French as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info