578059
71
Zoom out
Zoom in
Previous page
1/83
Next page
Recording is not possible.
The tape transport controls
(PLAY, F FWD, REW buttons
etc.) do not operate.
The record-inhibit plug on the cassette
is pressed in
a
).
The REMOTE/LOCAL switch is in the
REMOTE position, and the LOCAL
ENABLE menu setting is "STOP &
EJECT" or "ALL DISABLE"
a
).
No cassette is loaded
3
).
Pull out the plug, or use a different
tape.
Set the REMOTE/LOCAL switch to
LOCAL, or change the menu setting to
"ALL ENABLE".
Insert a cassette.
It is not possible to preset the
time counter display to an
arbitrary value.
Although the tape
transport is operating, the
time counter value does
not change.
The TC IN selector switch is in the
EXT position
a
).
The CTL/LTC/U-BIT switch is in the
CTL position.
The REMOTE/LOCAL switch is in the
REMOTE position, and the LOCAL
ENABLE menu setting is "STOP &
EJECT" or "ALL DISABLE"
a
).
The MENU button, TC PRESET button
or HOURS METER button has been
pressed.
The time counter display is showing
user bit data.
Set the TC IN selector switch to the INT
position.
Set the CTL/LTC/U-BIT switch to the
LTC or U-BIT position. (It is not possible
to preset time counter values.)
Set the REMOTE/LOCAL switch to
LOCAL, or change the menu setting to
"ALL ENABLE".
Press the button again, to exit from
menu setting mode, time code presetting
mode or Hours meter mode, as the case
may be. (In either of these modes, the
time counter display does not show time
counter information.)
Set the CTL/LTC/U-BIT switch to the
LTC or CTL position.
a) In these states an alarm message appears both on the monitor screen and time counter
display.
9-4 (E) Chapter 9 Operational Problems
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony UVW-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony UVW-1800 in the language / languages: English, French as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info